Hifiverse

Bookshelf Speakers - PMC IB2S-AII

Description, images, technical data and specifications

PMC IB2S-AII
Image source - (c) PMC

The IB2S-AII is a three-way active reference monitor in a single cabinet from PMC (The Professional Monitor Company), part of the company's studio range. PMC describes it as offering the attributes of its large ATL active reference monitors in a more compact form, for high-end reference monitoring in both stereo and surround formats.

Key specs that matter

Drive units are a PMC 250 mm carbon fibre/Nomex piston bass driver, a hand-built PMC 75 mm soft-dome midrange and a PMC 34 mm soft-dome tweeter with acoustic radiator. Crossover frequencies are 380 Hz and 3.8 kHz. Usable frequency response is 25 Hz - 25 kHz, maximum SPL is 125 dB at 1 m, and effective ATL length is 2.4 m. Power per channel is 2025 W - 1200 W rms (LF), 550 W rms (MF) and 275 W rms (HF). Inputs are balanced analogue main and LFE, each with a through connection, plus AES digital main and LFE with through, up to 96 kHz/24-bit. Each cabinet measures 745 x 330 x 564 mm (H x W x D) and weighs 46.5 kg, in Studio black.

Engineering and use context

Amplification is DSP-controlled class D in rack-mountable units. A control1200 and a power2400 amplifier are dedicated to each channel, and each amplifier module has its own linear, filtered power supply. Analogue signals pass a gain stage and 24-bit A/D conversion before the DSP, while the AES3 input goes through sample rate conversion (32 - 96 kHz). Inside the DSP are volume, EQ, a 24 dB-per-octave crossover and non-invasive driver protection by modelled excursion limiting.

Its bass unit is a flat-faced piston of honeycomb carbon fibre/Nomex in an extensively vented cast-aluminium chassis. PMC places it near one end of a long, heavily damped ATL cavity, and the lowest frequencies emerge from a large front vent in the same polarity as the driver. A perforated acoustic lens on the tweeter controls dispersion, and each 75 mm midrange unit takes seven days to produce.

Analogue input sensitivity is adjustable from +4 dBu to +16 dBu, input level trim covers ±8 dB, and LF and HF shelving filters cover ±8 dB. A wired RJ45 desktop remote with backlit display and jog wheel is supplied as standard. It sets volume (-48.5 dB to +15 dB), EQ, trims, input selection and three user presets. Operating voltage is 100 - 115 V or 220 - 230 V, selectable.

Pairing

A console, controller or interface with balanced analogue or AES3 outputs is required. Vertical and horizontal centre channel versions are available, as is a high-mass Studio Frame stand.

Alternatives

The IB2S XBD-AII is PMC's twin-cabinet version of this monitor, with a second bass cabinet and 128 dB maximum SPL.

Specifications

  • Model name

    IB2S-AII

  • Frequency Response low +/- 3dB (Hz)

    25

  • Frequency Response high +/- 3dB (Hz)

    25 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    275 + 550 + 1200

  • Size (sm)

    74.5 × 33.0 × 56.4

  • Weight (kg)

    46.5

  • Official link

More components