Hifiverse

Bookshelf Speakers - Logos Speakers MF-1 CX 10

Description, images, technical data and specifications

Logos Speakers MF-1 CX 10
Image source - (c) Logos Speakers

The MF-1 CX 10 is the midfield model in the range of active coaxial reference monitors from Logos Speakers s.r.l. of Naples, Italy. Logos was founded by Dave Mastrodonato, also known as the founder of DMSD Audio Tools, and was made official in 2024 after about six years of prototyping and development. In the current line-up it sits between the NF-1 CX 6.5 nearfield monitor and the M1 CX 12, alongside the SUB 12 subwoofer and the Andromeda. Logos lists three fields of application - midfield listening in control rooms, surround channels in Auro 3D, Dolby Atmos and DTS:X, and LCR surround monitoring in small-to-medium control rooms.

Key specs that matter

This is an active 2-way coaxial monitor. Its drive unit complement is a 254 mm LF bass unit and a 25 mm HF tweeter. Frequency response is 45 Hz - 20 kHz (-3 dB, 1 m full space, on-axis). Amplifier power per channel is 125 W rms for LF and 125 W rms for HF. Maximum continuous SPL and maximum peak SPL are both quoted as 110 dB at 1 m. Directivity is ±60 degrees horizontal and +50/-40 degrees vertical (-6 dB off axis at 10 kHz). Cabinet dimensions in portrait orientation are 300 x 300 x 300 mm (H x W x D), and each monitor weighs 12 kg.

Engineering and use context

Both drive units share one axis, with a separate amplifier channel for each. Input and output configuration is 2 in / 2 out. On the input side there are two balanced and two unbalanced analogue inputs plus a stereo AES-EBU digital input on XLR, with asynchronous sample rate conversion from 44.1 kHz to 216 kHz. Outputs are one wire-type speaker output and a stereo AES-EBU digital output on XLR. An RJ45 port gives access to a web interface over the network. Mains voltage is selectable between 110 and 240 V AC. Black and rosewood finishes are available.

Pairing

No external power amplifier is required. A source with balanced or unbalanced line outputs, or with an AES-EBU digital output on XLR, is required. The subwoofer in the same range is the SUB 12.

Alternatives

The NF-1 CX 6.5 is the nearfield monitor of the same range, with a 165 mm LF unit, a 34 mm tweeter and a response from 80 Hz.

Specifications

  • Model name

    MF-1 CX 10

  • Frequency Response low +/- 3dB (Hz)

    45

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    2 x 125

  • Size (sm)

    30.0 x 30.0 x 30.0

  • Weight (kg)

    12

  • Official link