Hifiverse

Bookshelf Speakers - Revel M146

Description, images, technical data and specifications

Revel M146
Image source - (c) Revel

The M146 is the larger of the two bookshelf models in the Revel Performa4 series. HARMAN Luxury Audio Group announced Performa4 on 2 April 2026 and showed it publicly at AXPONA 2026 in Chicago on 10-12 April, with shipping from April. Suggested retail price is USD 2,999 per pair. In the range it sits above the M145 and below the F345 and F346 floorstanding loudspeakers, and the C245 centre channel and B140 powered subwoofer extend the series to multichannel systems.

Key specs that matter

It is a 2-way bass-reflex loudspeaker with a 165 mm Micro Ceramic Composite (MCC) cone woofer and a 25 mm Deep Ceramic Composite (DCC) dome tweeter, crossed over at 1.7 kHz. Frequency response is 43 Hz - 40 kHz (±6 dB). Sensitivity is 85.5 dB (2.83 V/1 m) on the specification sheet and 86 dB in the launch announcement. Nominal impedance is 6 ohms, and recommended amplifier power is 15 - 200 W. Dimensions are 359 x 245.56 x 322.57 mm (H x W x D), and weight is 11 kg per speaker, with a shipping weight of 27 kg per pair. Wood veneer finishes are Walnut and Black Walnut.

Engineering and use context

Both driver materials are new for Performa4, and Revel credits DCC and MCC with high rigidity at reduced mass. The woofer has an inverted surround and an integrated trim ring with a hidden flange, so no mounting hardware is visible. Its newly patented cast aluminium frame was optimised with Finite Element Analysis (FEA) for cooling airflow, lower weight, higher rigidity and better resonance performance. Above the woofer, the DCC dome is mounted in the 7th-generation Acoustic Lens waveguide. According to Revel, the waveguide gives directivity control, greater efficiency and reduced distortion, and it increases dispersion at higher frequencies.

The 2-way crossover network has high-order slopes, with air-core inductors in the tweeter circuit. A rear-mounted port tunes the cabinet, which is rigid and cross-braced, with gently curved sides and a polished black accent. Magnetic grilles leave the front with no visible fasteners. Supplied with each pair are eight anti-slip pads, two grilles and two foam port plugs.

Pairing

Dual 5-way crystal brass binding posts with shorting straps allow single-wire, bi-wire or bi-amp connection. An amplifier within Revel's recommended power range is required. The matching stands are the optional MFS4, built from extruded aluminium and steel with wire management and sold at USD 699 per pair.

Alternatives

The Revel M145 is the smaller Performa4 bookshelf model, with a 130 mm woofer and a 1.8 kHz crossover.

Specifications

  • Model name

    M146

  • Frequency Response low +/- 3dB (Hz)

    43

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    86

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content

More components