The LS8/1 is a three-way stand-mount loudspeaker from Graham Audio, the British company that builds licensed BBC monitors together with engineer Derek Hughes. Graham Audio calls it its take on a classic format, an 8 inch bass driver in a 2 cubic foot box, used by many designers over the years. Among them were Derek Hughes and his father Spencer, who designed the BBC LS3/6. A pair cost GBP 4,712 in the UK and USD 9,700 in the USA, and a Derek Hughes Signature Edition was made in a limited run of 100 pairs.
Key specs that matter
It is a 3-way system with reflex loading. Drive units are a 200 mm bass unit, a 26 mm soft dome tweeter and a 19 mm soft dome super tweeter, with crossover points at 3.5 kHz and 14 kHz. Frequency response is 45 Hz - 20 kHz (±3 dB), nominal impedance is 8 ohms and sensitivity is 87 dB SPL (2.83 V, 1 m). Maximum output is over 100 dB for a pair at 2 m. Recommended amplifier power is 50 - 250 W unclipped programme. Each cabinet measures 30 x 63.5 x 30 cm (W x H x D) and weighs 17 kg.
Engineering and use context
Graham Audio uses a thin-wall damped construction in birch plywood for the enclosure, with hand-matched real wood veneers over the ply. As in the original LS3/6, the front and rear panels are attached to the cabinet with screws rather than glued joints. Graham Audio states that this decouples the panels and eases future maintenance. Custom paint finishes are available to order.
High-temperature motor design and materials give the drive units much greater power handling. Both the tweeter and the super tweeter are soft-dome units behind protective metal grilles. HF level is adjustable from the front panel, and the grille is held in place by concealed magnets.
Pairing
A solid-state or tube amplifier within Graham Audio's recommended power range is required. The matching stands are Graham Audio's own dedicated design.
Alternatives
The BBC-licensed LS5/9 is Graham Audio's two-way stand-mount monitor.