The JBL 4309 is a two-way bookshelf loudspeaker in the Studio Monitor style, designed and engineered at JBL's acoustic engineering facility in Northridge, California. HARMAN launched it in 2021 at USD 2,000 or GBP 1,799 per pair. It is a smaller relative of the 4349 and keeps the horn-loaded compression driver and blue baffle of the classic JBL studio monitor design.
Key specs that matter
A 165 mm cast-frame Pure Pulp cone woofer with a 38 mm voice coil is combined with the patented 2410H-2 25 mm compression driver, which has an annular ring Teonex diaphragm and an HDI geometry horn. Crossover frequency is 1.6 kHz. Frequency response is 42 Hz - 30 kHz (-6 dB), and the coverage angle is 100 degrees horizontal x 80 degrees vertical from 2 kHz to 17 kHz (-6 dB). Sensitivity is 87 dB (2.83 V/1 m), impedance is 4 ohms and recommended amplifier power is 25 - 150 W RMS. With grille, each speaker measures 419 x 260 x 227 mm (H x W x D) and weighs 10.98 kg. A pair ships at 25.5 kg, and the warranty is 5 years.
Engineering and use context
According to JBL, the 2410H-2 is derived from the JBL Professional D2 range of transducers. Its lightweight polymer annular diaphragm has a V-shaped geometry that reduces breakup modes, and the low diaphragm mass improves high-frequency extension. JBL designed the HDI horn geometry for uniform directivity, with consistent frequency response on- and off-axis.
In the woofer, a long-throw voice coil works with a symmetrical field motor, a flux stabilization ring and a copper shorting ring. Its Pure Pulp cone is a lightweight, rigid diaphragm intended to keep pistonic motion throughout the operating band. The V-braced enclosure has 18 mm thick walls and is reflex-loaded through dual front-firing, computer-optimised flared ports.
Air-core inductors, cast wire-wound resistors and low-ESR metallised film capacitors are used in the crossover network. An Ultra High-frequency (UHF) attenuator on the front panel below the horn works together with that network. Each cabinet has dual sets of gold-plated binding posts with shorting straps. Finishes are Walnut or Black Walnut furniture-grade satin wood veneer, with a monitor-style grille in dark blue for Walnut and in black for Black Walnut.
Pairing
An amplifier stable into 4 ohms is required. The terminals allow single-wire, bi-wire or bi-amplified connection, with the shorting straps removed for the last two. In the JBL Classic Series, the matching subwoofer is the L10cs.
Alternatives
The JBL 4349 is the larger two-way Studio Monitor, with a 305 mm woofer and a D2415K compression driver.