Hifiverse

Bookshelf Speakers - Audioengine Audioengine A2+ Next Gen Anniversary Edition

Description, images, technical data and specifications

Audioengine Audioengine A2+ Next Gen Anniversary Edition
Image source - (c) Audioengine

The A2+ Next Gen Anniversary Edition is a pair of powered desktop bookshelf speakers made for the 20th anniversary of Audioengine, founded in 2005 in Austin, Texas. Its original A2 appeared in 2007, and Audioengine states that more than 300,000 units of the line have been sold. This edition is hand-painted in Matte Orange and made in 250 serial-numbered pairs, delivered in a special box signed by the founders. It was announced around 28 July 2025 at USD 279, the price of the other colours.

Key specs that matter

Audioengine describes the system as a powered Bluetooth aptX-HD speaker system with a class AB amplifier. Rated power is 15 W RMS per channel at 4 ohms, with 30 W peak per channel and 60 W total peak (AES). Each speaker has a 70 mm aramid fibre woofer and a 20 mm silk dome tweeter. Inputs are a 3.5 mm stereo mini-jack, RCA L/R, USB-C and Bluetooth 5.3, and the output is a variable RCA line-out. Frequency response is 65 Hz - 22 kHz (±2.0 dB). SNR is above 95 dB (typical, A-weighted), THD+N is below 0.05% at all power settings, and input impedance is 10 kohms unbalanced. Each cabinet measures 15.6 x 10.6 x 13.8 cm (H x W x D), the left speaker weighs 1.72 kg and the right 1.51 kg.

Engineering and use context

Both amplifier channels are in the left speaker, a conservatively rated class AB analogue monoblock design. Its power and preamp circuit boards are mounted vertically for mechanical shock protection. The right speaker is passive and connects to the left one with speaker wire.

Cabinets are 6 mm MDF with extensive internal bracing, internal damping material, rounded edges and tuned front-port slots. The silk dome tweeters are ferrofluid-cooled and use neodymium magnets, and the woofers have aramid fibre woven glass composite cones with rubber surrounds. Both drivers are video shielded.

Bluetooth uses a Qualcomm QCC3031/3034 receiver with aptX-HD, aptX, AAC and SBC, at 24 bit for the aptX codecs and 16 bit for SBC and AAC. Typical range is up to 30 m and latency about 120 ms. According to Audioengine, the Bluetooth receiver uses the PCM2704C DAC. The USB-C input accepts 48 kHz at 24 bit (padded). Its auto-switching supply works from 100-240 V 50/60 Hz and draws 5 W at idle. Protection covers output current limiting, thermal over-temperature and power on/off transients. The box contains speaker wire, the power supply and a USB-C cable, and the warranty runs for three years.

Pairing

A powered subwoofer connects to the variable RCA line-out. A turntable requires a phono stage, internal or external, before the RCA input.

Alternatives

The Audioengine A5+ is the larger powered bookshelf speaker in the range.

Specifications

  • Model name

    Audioengine A2+ Next Gen Anniversary Edition

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    30

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components