Hifiverse

Headphones - JBL TUNE FLEX 2

Description, images, technical data and specifications

JBL TUNE FLEX 2
Image source - (c) JBL

The JBL Tune Flex 2 is a pair of true wireless noise-cancelling earbuds in JBL's Tune range. It has JBL's ghost design and two ear tip sound modes, chosen by fitting either open ear tips or sealing ear tips. Adaptive Noise Cancelling with Smart Ambient, JBL Pure Bass Sound with JBL Spatial Sound, six call microphones and Personi-Fi 3.0 complete the feature list, and a Ghost edition is also available.

Key specs that matter

Each earbud is equipped with a 12 mm dynamic driver. Frequency response is 20 Hz - 20 kHz, impedance is 13 ohms, sensitivity is 98 dB SPL at 1 kHz and maximum SPL is 95 dB. Bluetooth version 5.3 is used with the A2DP V1.4, AVRCP V1.6.2 and HFP V1.8 profiles. With ANC on, playtime is up to 8 hours plus 24 hours from the case, and with ANC off up to 12 hours plus 36 hours, up to 48 hours in total. Talk time reaches 5 hours with ANC off and 4.5 hours with ANC on. An IP54 rating applies to the earbuds. Weight is 4.4 g per earbud and 32.9 g for the case.

Engineering and use context

With the open ear tips the wearer stays aware of the surroundings. Sealing tips shut out the surroundings and improve passive noise cancelling. On top of that, Adaptive Noise Cancelling removes noise entirely or lets in a set amount of the outside world, Ambient Aware adjusts how much of it is heard, and TalkThru allows a conversation with the earbuds in.

Six microphones are used for calls. Each earbud carries two beamforming outer mics and one inner mic that isolates noise, with environmental noise cancellation and echo suppression algorithms. Microphone sensitivity is -38 dBV/Pa at 1 kHz.

Its earbuds measure 34.63 x 20.32 x 19.59 mm and the case 51.43 x 47 x 29.14 mm (l x w x d). In the Ghost edition an earbud weighs 4.2 g and the case 35.2 g. A 55 mAh, 3.85 V lithium-ion battery sits in each earbud, and a 545 mAh, 3.85 V cell in the case. Charging from empty takes 2 hours.

Multi-point connection and Fast Pair by Google are supported. In the JBL Headphones app the noise cancelling level and ambient sound settings are adjusted, fit is checked, the earbuds can be located, touch gestures are customised and output is set for audio or video. In the box are the earbuds, the charging case, a USB Type-C charging cable, sealing ear tips in three sizes and one size of open ear tips.

Pairing

A phone, tablet or computer with Bluetooth is required. Single-tap pairing through Fast Pair requires an Android device. Multi-point connection allows two source devices at once.

Alternatives

The JBL Tune Buds 2 is another pair of true wireless noise-cancelling earbuds in the Tune range, with 10 mm drivers.

Specifications

  • Model name

    TUNE FLEX 2

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    TWS

  • Frequency response low +/- 10dB (Hz)

    20

  • Frequency response high +/- 10dB (Hz)

    20 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    98

  • Impedance (Ohm (1 kHz))

    13

  • Playback time (hours)

    up to 12

  • Weight (g)

    4.4 (ear) + 32.9 (case)

  • Official link