Hifiverse

Headphones - Letshuoer S12

Description, images, technical data and specifications

Letshuoer S12
Image source - (c) Letshuoer

The S12 is an in-ear monitor from Letshuoer, a brand based in Dongguan, China, with one planar magnetic driver in each earpiece. At the time of its launch planar drivers were rare in in-ear monitors and mostly found in expensive models. List price was USD 149. Letshuoer later followed it with the S12 Pro, a sixth-anniversary edition and the S12 Ultra.

Key specs that matter

Each earpiece is equipped with a custom 14.8 mm planar driver. Frequency response is 20 Hz - 30 kHz, impedance is 16 ohms and sensitivity is 102 dB/mW. The detachable cable is 1.2 m long and is terminated in either a 3.5 mm single-ended or a 4.4 mm balanced plug, chosen when the S12 is ordered. Ingress protection is rated IPX3.

Engineering and use context

Letshuoer describes the 14.8 mm unit as a large planar diaphragm that most devices can drive. Its chassis is milled by a 5-axis CNC process, and the outline of each unit is one continuous curve with no hard edges across the seams. Two vent holes are drilled in the side of every earpiece to reduce pressure against the ear drums.

On each earpiece the cable connector protrudes slightly from the side, so the earhook of the cable sits on the ear without twisting inwards. According to Letshuoer, the receptor is slightly recessed into the chassis for longevity. The cable has 128 strands of silver-plated monocrystalline copper and is specified as soft enough not to tangle.

Foam, standard and clear eartips in S, M and L sizes come in the box, together with the cable, a Letshuoer faux-leather case and a user manual. Colours are Frosted Silver and Nebula Grey. Letshuoer also sells the S12 in a set with its DT01 PRO.

Pairing

A source with a 3.5 mm single-ended or a 4.4 mm balanced headphone output is required, depending on the cable termination. Letshuoer names its DT02 as a matching source, used with the 3.5 mm stock cable or an aftermarket 2.5 mm cable.

Alternatives

The S12 Pro is Letshuoer's later version of this planar in-ear monitor.

Specifications

  • Model name

    S12

  • Transducer principle

    Electostatic or Planar magnetic

  • Scheme

    Closed

  • Wearing style

    In-ear

  • Frequency response low +/- 10dB (Hz)

    20

  • Frequency response high +/- 10dB (Hz)

    30 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    3.5mm single-ended / 4.4mm balanced connector

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    102

  • Impedance (Ohm (1 kHz))

    16

  • Playback time (hours)

    N/A

  • Weight (g)

    N/A

  • Official link