Hifiverse

Headphones - Letshuoer Singer

Description, images, technical data and specifications

Letshuoer Singer
Image source - (c) Letshuoer

Singer is a two-driver in-ear monitor from Letshuoer of China, a company that traded as Shuoer when this model appeared. It began with OEM and ODM work before building its own brand and later became best known for planar magnetic models such as the S12. Each earpiece pairs a dynamic driver with a second unit that the maker calls electrostatic, the same driver concept Shuoer used in its Tape earphones. Listed at USD 74.99, the Singer sat in the USD 50 to 100 class and came with a balanced cable as standard. Its shell is finished in dark metallic blue with white lettering, and the model is now sold under the Letshuoer name.

Key specs that matter

Driver complement per side is one 8 mm dynamic driver and one electrostatic driver. Impedance is 32 ohms ±2 ohms, sensitivity is 103 dB ±1 dB, frequency response is 20 Hz - 30 kHz and THD is below 0.8%. Housings are made of 304 stainless steel. The detachable cable has 0.78 mm two-pin connectors, four cores of high-purity single crystal copper and a length of 1.25 m. It terminates in an L-shaped 2.5 mm balanced plug, with an aluminium plug housing and Y-split.

Engineering and use context

No separate energiser is used for the electrostatic unit, unlike full-size electrostatic headphones, and both drivers are driven from one standard headphone output. Two-pin sockets on the earpieces sit in plastic housings. A plastic chin slider is mounted on the cable below the Y-split. Its shell is a slim, bullet-shaped cylinder with a closed design that sits deep in the ear canal and gives passive isolation. Removable metal nozzles screw onto the shells, and ridges on them hold the ear tips. Two sets of nozzle filters are supplied, so the tuning can be altered slightly. Coloured rings on the faceplates identify the channels, blue for left and red for right.

Pairing

A source with a 2.5 mm balanced headphone output is required for the stock cable. A 3.5 mm adapter in the box allows connection to single-ended outputs. The accessory kit also includes six pairs of silicone tips in two types, two pairs of foam tips and a faux leather carry case.

Alternatives

The Shuoer Tape Pro is the brand's in-ear model with a low-voltage electrostatic and dynamic driver pair, 16 ohms impedance, 105 dB sensitivity and faceplate screws that adjust the bass.

Specifications

  • Model name

    Singer

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    In-ear

  • Frequency response low +/- 10dB (Hz)

    N/A

  • Frequency response high +/- 10dB (Hz)

    N/A

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    2-pin 0.78 mm (2.5 mm plug cable)

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedance (Ohm (1 kHz))

    N/A

  • Playback time (hours)

    N/A

  • Weight (g)

    N/A

  • Official link