Hifiverse

Headphones - KEF Mu3

Description, images, technical data and specifications

KEF Mu3
Image source - (c) KEF

The Mu3 is a pair of noise cancelling true wireless earphones from KEF, designed in collaboration with Ross Lovegrove. It continues the work of KEF and Lovegrove that began with the Muon loudspeaker and the Muo Bluetooth speaker. Its earphones and charging case come in Silver Grey and Charcoal Grey.

Key specs that matter

Each earphone has an 8.2 mm full-range dynamic driver. Frequency range is 20 - 20,000 Hz. Sensitivity is 104 dB/1 mW at 1 kHz, and impedance is 16 ohms. Maximum power output is 5 mW. Bluetooth 5.0 is used with the SBC and AAC codecs, a range of 10 m, transmit power of 13 dBm or less and a frequency band of 2.402 - 2.48 GHz. Battery play time is 9 hours per charge with Bluetooth and ANC on, plus 15 hours from the charging case, and 5 minutes of fast charging give 1 hour of play. The Li-ion batteries are 55 mAh in each earbud and 500 mAh in the case. Each earbud measures 24.5 x 17.5 x 26.3 mm (H x W x D) and weighs 5.8 g, and the case measures 33.5 x 62 x 52 mm and weighs 46.8 g.

Engineering and use context

According to KEF, the drivers were tuned by the same engineering team responsible for its loudspeakers. Active Noise Cancellation is specially tuned by KEF. In Ambient Mode, selected at the touch of a button, noise cancellation is disengaged and the sound picked up by the microphones is played through the earphones.

Both earpieces receive the signal at the same time. This simultaneous transmission replaces the usual relay, where audio is sent to one earpiece and passed on to the other, at the risk of added latency. A high-capacity battery is combined with power management and fast-charge technology. The earphones are rated IPX5 splash-proof, and the operating temperature range is -10 °C to 45 °C.

KEF analysed different ear shapes and sizes and developed four ear tip sizes - large, medium, small and short - that rest on the ear concha and provide a seal for noise isolation. The weighting of the earphones keeps them balanced in the ear. Each earbud has a multi-function button for playback, volume and calls. The charging case has built-in wireless charging and a USB-C input rated at DC 5 V, 600 mA. In the box are the case, a USB-C charging cable and the four sets of silicone ear tips.

Pairing

An iOS or Android device or another Bluetooth source is required.

Alternatives

The Mu7 is KEF's over-ear wireless headphone with Smart Active Noise Cancellation and 40 mm drivers.

Specifications

  • Model name

    Mu3

  • Transducer principle

    Dynamic

  • Scheme

    Close

  • Wearing style

    TWC

  • Frequency response low +/- 10dB (Hz)

    20

  • Frequency response high +/- 10dB (Hz)

    20000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    104

  • Impedance (Ohm (1 kHz))

    16

  • Playback time (hours)

    N/A

  • Weight (g)

    0.0058

  • Official link

More components