Hifiverse

Headphones - JBL ENDURANCE PEAK II

Description, images, technical data and specifications

JBL ENDURANCE PEAK II
Image source - (c) JBL

The JBL Endurance Peak II is a pair of waterproof true wireless in-ear sport headphones from the JBL Endurance range. Both earbuds have a Powerhook ear hook and touch controls. Colour options are black, blue and white.

Key specs that matter

Each earpiece has one 10 mm dynamic driver. Frequency response is 20 Hz - 20 kHz, impedance is 16 ohms and sensitivity is 95 dB SPL at 1 kHz. Maximum SPL is 93 dB SPL. Total playback time is 30 hours, made up of 6 hours in the buds and 24 hours from the case, and charging time from empty is less than 2 hours. Protection is IPX7 against sweat and water. Each earpiece weighs 13 g (26 g combined), and the charging case weighs 77 g.

Engineering and use context

Bluetooth version is 5.0 with the A2DP 1.3, AVRCP 1.5 and HFP 1.7 profiles. The transmitter operates at 2.4 - 2.4835 GHz with a power of 10 dBm and uses GFSK, π/4 QPSK and 8DPSK modulation. Microphone sensitivity is -38 dBV/Pa at 1 kHz, and the built-in microphones are used for hands-free stereo calls and voice assistant access.

The Powerhook is a bendable wire inside the ear hook that adjusts the fit to the ear. With Dual Connect the earbuds operate independently, so calls, volume and the voice assistant are available on either ear, whichever earbud is taken out of the case first.

Power comes from a 60 mAh/3.7 V lithium-ion battery in each earbud and a 770 mAh/3.7 V lithium-ion battery in the charging case. The case charges over a USB Type-C cable from a 5.0 V, 1 A supply. Supplied in the box are the charging case, the Type-C charging cable, ear tips in three sizes, a warranty and warning leaflet and a quick start guide with safety sheet.

Pairing

A Bluetooth source with the A2DP profile is required for music playback, and the HFP profile is required for calls. No headphone amplifier or cable connection is used.

Alternatives

The JBL Endurance Peak 3 is the later true wireless sport model, with a 10 mm dynamic driver, up to 50 hours of combined playback and IP68 dust and water protection.

Specifications

  • Model name

    ENDURANCE PEAK II

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    TWS

  • Frequency response low +/- 10dB (Hz)

    20

  • Frequency response high +/- 10dB (Hz)

    20 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    95

  • Impedance (Ohm (1 kHz))

    16

  • Playback time (hours)

    up to 30

  • Weight (g)

    26 + 77

  • Official link