Hifiverse

Headphones - Audio-Technica ATH-S300BT

Description, images, technical data and specifications

Audio-Technica ATH-S300BT
Image source - (c) Audio-Technica

The ATH-S300BT is a wireless headphone with active noise cancelling in the S (Street) series that Audio-Technica started in 2008. Released in June 2024, it adds an ambience control function with hear-through and noise-cancelling modes. A terrazzo pattern, the artificial marble used in building, is scattered over the baffle, so the size and layout of the grains differ from one unit to another. The headband and arms are shaped to follow the head without spreading out.

Key specs that matter

Type is closed-back dynamic with 40 mm drivers. Frequency response is 20 - 20,000 Hz, sensitivity is 103 dB/mW and impedance is 44.5 ohms. The headphone microphone is an omnidirectional MEMS type with a response of 50 - 10,000 Hz. Bluetooth is version 5.1 with a range of up to 10 m in line of sight, profiles A2DP, AVRCP, HFP and HSP, AAC and SBC codecs and SCMS-T content protection. A built-in 3.85 V lithium-polymer battery gives up to approx. 90 hours of playback with noise cancelling off and up to approx. 60 hours with it on, and charging time is about 2.5 hours. Weight is approx. 258 g.

Engineering and use context

Audio-Technica calls its noise cancelling hybrid digital. Each housing carries two microphones, one inside and one outside, to detect ambient noise, and the system combines the feedforward and feedback methods to generate an anti-phase sound wave. In hear-through mode the microphones pick up surrounding voices while music plays. A button switches between hear-through, noise cancelling and off, also during a wireless call. The drivers are dedicated units developed for the ambience control modes.

A 3-minute charge gives about 2.5 hours of use with noise cancelling off. Multipoint keeps two devices, such as a smartphone and a PC or tablet, connected over Bluetooth at the same time, and a low latency mode reduces the offset between sound and picture in games and video. Thick earpads enclose the ears. The supplied 1.2 m cord with an in-line microphone and remote ends in a gold-plated 4-pole 3.5 mm L-shaped plug and allows wired listening and calls, and ambience control is switched off in wired use. A 30 cm USB Type-A to USB Type-C charging cable is included.

Pairing

A Bluetooth source with AAC or SBC is compatible. A 3.5 mm headphone socket is required for wired use with the supplied cord.

Alternatives

The ATH-S220BT is a lighter on-ear model in the Audio-Technica S series without noise cancelling.

Specifications

  • Model name

    ATH-S300BT

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    20

  • Frequency response high +/- 10dB (Hz)

    20 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    103

  • Impedance (Ohm (1 kHz))

    44.5

  • Playback time (hours)

    Max. approx. 90 hours(when Bluetooth on, noise cancelling off)

  • Weight (g)

    258

  • Official link