Hifiverse

Headphones - Audio-Technica ATH-M20xBT

Description, images, technical data and specifications

Audio-Technica ATH-M20xBT
Image source - (c) Audio-Technica

The ATH-M20xBT is a closed-back wireless over-ear headphone from Audio-Technica, the Bluetooth version of the wired ATH-M20x studio monitor headphone with the same tuning, according to Audio-Technica. Launch prices in the UK and Europe were GBP 79.99 and EUR 89 including VAT, and it comes in black (ATH-M20xBTBK) and white (ATH-M20xBTWH).

Key specs that matter

Type is closed-back dynamic, with 40 mm drivers. Frequency response is 5 - 32,000 Hz, sensitivity is 100 dB/mW and impedance is 36 ohms. Bluetooth version 5.0 supports the A2DP, AVRCP, HFP and HSP profiles, the AAC and SBC codecs and SCMS-T content protection, with a transmission band of 20 - 20,000 Hz. Maximum communication range is approx. 10 m line of sight, and maximum RF output is 10 mW EIRP. Power comes from a DC 3.7 V lithium polymer battery, with continuous music playback of max. approx. 60 hours and a charging time of approx. 4 hours. A 10-minute rapid charge over USB-C gives up to 3 hours of use. Weight is approx. 216 g.

Engineering and use context

Each 40 mm driver uses a rare earth magnet and a copper-clad aluminium wire voice coil, and Audio-Technica tunes the drivers for more low-frequency output. The over-ear design provides sound isolation in loud environments. Earpads and headband are of professional-grade material.

A microphone and control buttons are built into the left earcup for calls, music playback, volume and mute. Its microphone is an omnidirectional electret condenser with a sensitivity of -42 dB (1 V/Pa, at 1 kHz) and a frequency response of 50 - 20,000 Hz. With multipoint pairing the headphone stays connected to two Bluetooth devices at once. The low latency mode improves synchronisation between audio and video for streaming and gaming. Bluetooth operates in the 2.402 - 2.480 GHz band with FHSS spread spectrum and GFSK, Pi/4DQPSK and 8DPSK modulation. Operating temperature range is 5 - 40 °C.

Supplied accessories are a 1.2 m cable with an L-shaped, gold-plated 3.5 mm three-pole stereo mini-plug and a 30 cm USB Type-A to USB Type-C charging cable. With the 1.2 m cable the ATH-M20xBT is used as a standard wired headphone. Earpads and a cable are sold separately as replacement parts.

Pairing

A Bluetooth source with AAC or SBC is required for wireless use. For wired use, a headphone output with a 3.5 mm socket is required.

Alternatives

The ATH-M50xBT2 is the flagship wireless version of the Audio-Technica ATH-M50x, with 45 mm large-aperture drivers and SBC, AAC and LDAC codecs.

Specifications

  • Model name

    ATH-M20xBT

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    5

  • Frequency response high +/- 10dB (Hz)

    32 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wireless

  • Connector (mm)

    N/A

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    100

  • Impedance (Ohm (1 kHz))

    36

  • Playback time (hours)

    Max. approx. 60 hours

  • Weight (g)

    216

  • Official link