Hifiverse

Headphones - Audio-Technica ATH-AWKG

Description, images, technical data and specifications

Audio-Technica ATH-AWKG
Image source - (c) Audio-Technica

The ATH-AWKG is a closed dynamic headphone from Audio-Technica with housings of Kurogaki wood, released in Japan on 8 December 2023. Kurogaki is not a species of its own. The name describes persimmon wood with black ink-like patterns inside, found only in trees more than 100 years old. Drying it is difficult and needs specialist knowledge, so very little is produced, and the wood was valued by nobles and men of letters as early as the Nara and Heian periods. Audio-Technica first used it on the AW-KG NARU headphone supplied with the HPA-KG NARU system and added the ATH-AWKG as a separately sold model.

Key specs that matter

Type is closed dynamic with a 53 mm driver. Sensitivity is 102 dB/mW and impedance is 48 ohms. Frequency response is 5 Hz - 45 kHz, and maximum input is 2,000 mW. Weight is approx. 390 g without the cable. Both housings have A2DC connector jacks. Two detachable 3.0 m fabric cables are included, one with a gold-plated 6.3 mm stereo plug and one balanced cable with a 4-pin XLR-M connector, together with a wooden storage case decorated in Kurogaki.

Engineering and use context

Each driver uses a German-made Permendur magnetic circuit with high flux density. A light but durable titanium flange holds the diaphragm, and Audio-Technica states that with it the diaphragm responds accurately to the audio signal. The bobbin-wound voice coil is high-purity 6N-OFC copper.

Inside the housing, D.A.D.S. (Double Air Damping System) forms two spaces of different size in the acoustic chamber. They act as an air spring for extended low frequencies.

Specialist craftsmen apply an urushi lacquer finish to the Kurogaki housings by hand, and the pattern of the wood differs from one unit to the next. Arms are magnesium alloy, light and rigid, and their mounting angle together with the shape of housing and earpad improves fit, reduces sound leakage and raises the seal. Earpads and headband are covered in sheepskin. Assembly and strict inspection are done by hand by craftsmen at Audio-Technica's factory in Japan.

Pairing

The 6.3 mm cable connects to a standard 6.3 mm headphone output. A headphone amplifier with a 4-pin XLR balanced output is required for the XLR cable, and Audio-Technica states that this connection gives higher channel separation. The matching headphone amplifier/preamplifier is the HPA-KG NARU. Replacement earpads are listed as HP-AWKT.

Alternatives

The ATH-AWAS is the closed wooden model from Audio-Technica with Asada Zakura housings and a 40 ohm rating.

Specifications

  • Model name

    ATH-AWKG

  • Transducer principle

    Dynamic or Isodynamic

  • Scheme

    Closed

  • Wearing style

    Over-ear

  • Frequency response low +/- 10dB (Hz)

    5

  • Frequency response high +/- 10dB (Hz)

    45 000

  • Max. sound pressure level (dBSPL (1 kHz @ 5% THD))

    N/A

  • Connection type

    Wired

  • Connector (mm)

    A2DC connector jack

  • Sensitivity (dBSPL (1 kHz/ 1 mW)))

    102

  • Impedance (Ohm (1 kHz))

    48

  • Playback time (hours)

    N/A

  • Weight (g)

    390

  • Official link