The RX-V4A is a 5.2-channel AV receiver from Yamaha with CINEMA DSP 3D, four HDMI inputs and one HDMI output, and wireless surround through MusicCast. Yamaha announced it in August 2020 as part of the redesigned RX-V generation, together with the seven-channel RX-V6A. US MSRP at launch was USD 439.95.
Key specs that matter
Rated output power is 80 W (20 Hz - 20 kHz, 2ch driven, 6 ohms, 0.06% THD) and 115 W (1 kHz, 1ch driven, 6 ohms, 0.9% THD). Maximum effective output power is 145 W (1 kHz, 1ch driven, 6 ohms, 10% THD). Decoding covers Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio, without Dolby Atmos or DTS:X. HDMI pass-through is 8K60B and 4K120AB at 24 Gbps, with upscaling up to 4K, eARC, Dolby Vision, HDR10+, VRR and ALLM. The D/A converter is a Burr-Brown PCM5101A rated at 384 kHz/32-bit. Dimensions are 435 x 171 x 377 mm (W x H x D), or 245 mm high with the antenna up, and weight is 8.8 kg.
Engineering and use context
Its amplifier section is a High Slew Rate Amplifier. According to Yamaha, the new circuit reaches a high slew rate while keeping signal transmission stable. CINEMA DSP has 17 programs and is built from sound field data measured in concert halls and music clubs, combined with digital signal processing in dedicated LSI devices. SILENT CINEMA and Virtual CINEMA DSP, Dialog Level Adjustment, Pure Direct, Adaptive DRC and an audio delay of 0 - 500 ms are included. A Compressed Music mode restores what was lost when music is encoded to MP3 and similar formats.
Network playback accepts FLAC up to 192 kHz/24-bit, WAV and AIFF up to 192 kHz/32-bit, ALAC up to 96 kHz/24-bit and DSD up to 11.2 MHz. Wi-Fi works on 2.4 and 5 GHz, and AirPlay 2, Spotify Connect, Bluetooth (SBC/AAC), MusicCast multi-room and Roon Tested status are supported. Four SCENE presets store an input together with a sound program and HDMI output, and are recalled from the front panel or remote control. Yamaha states that QMS (Quick Media Switching) cannot be added by firmware, because of a hardware limitation after the change in the HDMI 2.1a specification. Standby power consumption is 0.1 W.
Pairing
Five passive speakers and up to two powered subwoofers are required, and the receiver supports bi-amp connection. Rear channels can be replaced by MusicCast 20 or MusicCast 50 wireless speakers through MusicCast Surround. Wired inputs are one optical, one coaxial and three analogue, plus front USB, FM/AM tuner and DAB by region. A turntable needs its own phono stage, as there is no phono input.
Alternatives
The Yamaha RX-V6A is the 7.2-channel receiver from the same launch, with Dolby Atmos, DTS:X, seven HDMI inputs and a phono input.