Hifiverse

Receivers — Yamaha RX-A4A

Description, images, technical data and specifications

Yamaha RX-A4A
Image source - (c) Yamaha

The RX-A4A is a 7.2-channel AV receiver in Yamaha's AVENTAGE series, with Surround AI processing, seven HDMI inputs and three outputs, a Qualcomm QCS407 processor and a Zone 2 output. In the same generation the RX-A6A has 9.2 channels and the RX-A8A 11.2 channels.

Key specs that matter

Rated output power is 110 W per channel (20 Hz - 20 kHz, 2 channels driven, 8 ohms, 0.06% THD) and 135 W (1 kHz, 1 channel driven, 8 ohms, 0.9% THD). Maximum effective output power is 165 W (1 kHz, 1 channel driven, 8 ohms, 10% THD). HDMI is 7 in / 3 out with HDCP 2.3, 8K60, 4K120 and 40 Gbps pass-through, eARC, upscaling to 8K, Dolby Vision, HDR10+, VRR and ALLM. Decoding covers Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, DTS:X and DTS-HD Master Audio. Audio inputs are two optical, one coaxial, four analogue and one phono, plus USB, and outputs include 7.2-channel pre outs, a headphone jack and two +12 V triggers. Network playback supports FLAC up to 384 kHz / 24-bit, WAV and AIFF up to 384 kHz / 32-bit and DSD up to 11.2 MHz. Bluetooth supports SBC and AAC. Dimensions are 435 x 191 x 442 mm (W x H x D) and weight is 16.2 kg.

Engineering and use context

A Qualcomm QCS407 with 64-bit processing and a dedicated audio DSP runs the decoding. Surround AI analyses dialogue, background music, ambient sounds and sound effects in each scene and adjusts the surround effect in real time. CINEMA DSP HD3 has 24 programs and can play up to 11.1 channels from a 7.1-channel layout when front height speakers are connected. Dolby Atmos Height Virtualization uses up to five speakers to replicate two in-ceiling speakers, or all seven channels for four overhead speakers. Conversion uses a 384 kHz / 32-bit ESS ES9007S DAC rated at up to 120 dB dynamic range.

According to Yamaha, the newly designed amplifier circuit has more than double the slew rate with stable signal transmission. Its internal layout is symmetrical with signal paths kept as short as possible. An H-cross frame raises chassis rigidity, and the mechanical structure limits transfer of transformer vibration to the amplifier circuit. Under the front centre of the base sits the A.R.T. Wedge, a fifth foot that damps vibration from the power transformer, power transistors and heat sinks. Zone 2 can be driven from the receiver's own amplifier or output through pre outs or HDMI. The RX-A4A is Roon Tested and Works With Sonos certified.

Pairing

The amplifier channels support a 5.1 system with two overhead or Dolby Atmos elevation speakers. Bi-amping of the front speakers is supported. The pre outs allow an external power amplifier, and the phono input accepts a turntable.

Alternatives

The Yamaha RX-A6A is the 9.2-channel AVENTAGE receiver with 11.2-channel processing, Auro-3D decoding and XLR inputs.

Specifications

  • Model name

    RX-A4A

  • Type

    AV Reciever

  • Number of main channels

    7

  • Number of subwoofers channels

    2

  • Decoding up to Dolby Atmos

    Yes

  • Decoding up to DTS X

    Yes

  • DSP chip

    Yes

  • Phono

    N/A

  • Output power (8Ω)

    110

  • Output power (4Ω)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    435 x 191 x 442

  • Weight (kg)

    16.2

  • Official link