Hifiverse

Receivers — Anthem MRX 740 8K

Description, images, technical data and specifications

Anthem MRX 740 8K
Image source - (c) Anthem

Anthem's MRX 740 8K pairs seven internal amplifier channels with a processor that decodes up to 11.2 channels, and its US price at launch in 2021 was USD 2,899. Atmos, DTS:X and IMAX Enhanced decoding are all included. Two zones are available, each able to carry HDMI and pre-out signals.

Key specs that matter

Rated output is 140 W per channel into 8 ohm at 1 kHz with two channels driven. Anthem lists a frequency response of 20 Hz to 30 kHz within 0.2 dB and a line-level signal to noise ratio of 110 dB, IHF-A weighted. Conversion is handled by 32-bit 768 kHz DACs. RCA pre-outs cover 11.2 channels, meaning eleven main outputs and two subwoofer outputs. The chassis is 431.8 mm wide, 152.4 mm high and 364 mm deep, the weight is 15.1 kg, and maximum power consumption is 485 W.

Engineering and use context

A toroidal transformer powers the amplifier section. Rear connections include five analog inputs, three optical and two coaxial digital inputs, an IR input, a 12 V trigger, RS-232 and a service-only USB port, and the front panel carries a full-size headphone jack beside the volume dial. Video switching uses HDMI 2.1 with HDCP 2.3, with seven dedicated 8K inputs and three outputs including one with eARC, so 8K at 60 Hz or 4K at 120 Hz sources pass through, and VRR and ALLM are supported for gaming. Network streaming comes from Apple AirPlay, Google Cast and Spotify Connect, with Bluetooth for direct connection from phones. Setup and daily use are possible through a browser-based web interface or a phone app over Wi-Fi, and IP control is compatible with Savant, Control4, RTI, URC, Crestron and ELAN. In the 740, the first five amplifier channels work in Class AB and are rated at 170 W into 6 ohm with two driven, while the remaining two are Class B channels rated at 60 W into 8 ohm when driven together. The 740 shares its outer dimensions with the eleven-channel model.

Pairing

With seven powered channels and eleven pre-outs, the MRX 740 8K can run a 7.x layout from its own amplifiers and hand four more channels to an external power amplifier to reach an 11.2 configuration. Its two subwoofer outputs carry the same mono bass signal to a pair of powered subwoofers. Roon is supported alongside the other streaming services. The second zone output can send its own HDMI and line-level signal to another room.

Alternatives

The Anthem MRX 1140 8K adds four amplifier channels, for eleven in total, and extends processing to 15.2 channels.

Specifications

  • Model name

    MRX 740 8K

  • Type

    8K Receivier

  • Number of main channels

    7

  • Number of subwoofers channels

    2

  • Decoding up to Dolby Atmos

    Yes

  • Decoding up to DTS X

    Yes

  • DSP chip

    Yes

  • Phono

    N/A

  • Output power (8Ω)

    140

  • Output power (4Ω)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    152.4 × 431.8 × 364

  • Weight (kg)

    15.1

  • Official link