Hifiverse

Receivers — Anthem MRX 540 8K

Description, images, technical data and specifications

Anthem MRX 540 8K
Image source - (c) Anthem

The MRX 540 8K is the entry model of Anthem's MRX Series of A/V receivers, below the MRX 740 8K and MRX 1140 8K. It has 7.2 pre-amplifier channels and five amplifier channels, HDMI 2.1 connections with 8K support and the latest version of ARC Genesis. Anthem lists it at USD 1,899.99, and black is the only finish offered.

Key specs that matter

Maximum continuous output is 100 W into 8 ohms and 130 W into 6 ohms per channel for channels 1 to 5 (20 Hz - 20 kHz, 1% THD, two channels driven). Speaker impedance is specified as above 4 ohms. Processing covers 7.2 channels, with a maximum speaker configuration of 5.2.2. Digital to analogue conversion uses 32-bit/768 kHz DACs. HDMI is version 2.1 with HDCP 2.3, with 7 inputs and 2 outputs, one of them with eARC. Analogue connections are 5 inputs, 1 line output and 7.2 pre-amplifier outputs, and digital connections are 2 coaxial inputs, 3 optical inputs and 1 optical output. Both subwoofer outputs are parallel. A USB-A port (5 V/500 mA) is for service only. Dimensions are 432 x 368 x 152 mm (W x D x H), the rack height with the rackmount kit is 4U, and weight is 12.8 kg. Typical load is 365 W, with 0.3 W in standby.

Engineering and use context

All seven HDMI inputs are 8K inputs with 8K/60 Hz or 4K/120 Hz pass-through. HDR support covers HDR10, HDR10+, Dolby Vision, HLG and Dynamic HDR, and VRR, ALLM and QFT are the gaming features. On the audio side it decodes Dolby TrueHD, Dolby Atmos and Dolby Atmos Music, DTS-HD Master Audio, DTS:X and IMAX Enhanced. Upmixing modes are Dolby Surround, DTS Neural X, DTS Virtual X, Multichannel Stereo and Anthem's own AnthemLogic-Music and AnthemLogic-Cinema. FLAC, ALAC, WAV and DSD files are supported.

ARC Genesis comes with a redesigned calibration microphone and stores four profiles. Network connection is Wi-Fi or LAN, and streaming support includes Apple AirPlay, Google Chromecast Audio, Spotify Connect and Bluetooth. A Web User Interface is provided, and IP control connects to Savant, Control4, RTI, URC, Crestron and ELAN systems. The Anthem Remote App works over Wi-Fi. Construction is an aluminium chassis with a machined aluminium faceplate and a 152 mm front display. There is no MM phono input, no Zone 2 and no Zone 2 HDMI output.

Pairing

Loudspeakers with an impedance above 4 ohms are required. Speaker terminals are provided for front left, front right, centre, surround left and surround right. A stereo power amplifier on the remaining pre-amplifier outputs is required for height channels.

Alternatives

The Anthem MRX 740 8K is the next A/V receiver in the MRX Series.

Specifications

  • Model name

    MRX 540 8K

  • Type

    8K AV Receiver

  • Number of main channels

    5

  • Number of subwoofers channels

    2

  • Decoding up to Dolby Atmos

    Yes

  • Decoding up to DTS X

    Yes

  • DSP chip

    Yes

  • Phono

    N/A

  • Output power (8Ω)

    100

  • Output power (4Ω)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    30 000

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    152.4 × 431.8 × 364

  • Weight (kg)

    12.8

  • Official link