Hifiverse

Preamplifiers — TAD TAD-C1000

Description, images, technical data and specifications

TAD TAD-C1000
Image source - (c) TAD

The TAD-C1000 is a line-level stereo preamplifier in the Evolution series of hi-fi components from Technical Audio Devices Laboratories, or TAD. It accepts analogue line signals only, and TAD states that its task is to take line sources such as a disc player and pass them on without compromising accuracy in processing and transmission. It is built to order in two finishes, listed as TAD-C1000-S and TAD-C1000-K.

Key specs that matter

Connections cover four balanced XLR inputs and two unbalanced RCA inputs, while the output side offers two XLR connections alongside two RCA connections. Rated output voltage is 1.6 V balanced and 0.8 V unbalanced, while maximum output reaches 16 Vrms balanced and 8 Vrms unbalanced. The inputs accept up to 14 V balanced or 7 V unbalanced with the volume at minus 40 dB. Gain is 12 dB. Total harmonic distortion is 0.003 percent and TAD quotes 120 dB signal-to-noise under the IHF method. Frequency response covers 10 Hz to 100 kHz within minus 1 dB. The unit uses 26 W, dropping to 0.5 W or less in standby, and is offered for 120 V 60 Hz mains in the USA and 220 to 240 V 50 or 60 Hz in Europe and Asia. The chassis is 440 mm wide, 150 mm high and 424 mm deep and weighs 17.0 kg.

Engineering and use context

Amplification happens in a single-stage current-feedback amplifier first designed for the TAD Reference series. Keeping the count of amplifying elements to a minimum is central to the design. Each first-stage FET is tested, and matched pairs are selected for the plus and minus sides of the flat amplifier section. A symmetrical circuit layout reduces errors between channels and between polarities. Volume is set by a ladder-resistance switching attenuator, which TAD rates at under 0.0005 percent distortion with a 1 Vrms input, and the precision volume knob turns on ball bearings. Separate custom toroidal transformers supply the audio and control circuits, and the filtering uses TAD's own electrolytic capacitors. To isolate it from vibration, the unit rests on chromium molybdenum steel spike feet with adjustable holders.

Pairing

The balanced outputs connect directly to TAD power amplifiers such as the TAD-M2500MK2 stereo model or a pair of TAD-M700 monoblocks.

Alternatives

The TAD-C2000 is the other Evolution series preamplifier, adding a built-in D/A converter with twin differential Burr-Brown PCM1794A chips.

Specifications

  • Model name

    TAD-C1000

  • Analog inputs (balanced)

    4

  • Analog inputs (single-ended)

    2

  • Analog outputs (balanced)

    2

  • Analog outputs (single-ended)

    2

  • Gain (dBu)

    12

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.003

  • Dimensions (mm)

    440 x 150 x 424

  • Weight (kg)

    17

  • Official link

More components