Hifiverse

Preamplifiers - Audio Note M6 Line

Description, images, technical data and specifications

Audio Note M6 Line
Image source - (c) Audio Note

The M6 Line is a tube line preamplifier from Audio Note (UK). It fulfils the company's Level 4 criteria - pure Class A operation, zero negative feedback, single-ended circuit topology and tube rectification. Besides the M6 Line, the M6 range includes the M6 Line Balanced CD Input, the M6 Line Signature, the M6 Phono, the M6 Phono Balanced CD Input and the phono-only M6 RIAA. Each can be ordered with an anodised aluminium or a black acrylic fascia.

Key specs that matter

Its line stage uses an ECC82 and a 7044 tube. Input impedance is 100 kOhm at line level, input sensitivity is 126 mV for 1 V output, and output impedance is below 10 ohms. Audio Note quotes 140 x 440 x 410 mm (H x W x D) both for the preamplifier and for the separate PSU where one applies, and 16 kg for each unit. Mains input is AC 100-120 V or 220-240 V, 50/60 Hz. A 47 kOhm input impedance is listed for the phono input of the Phono versions.

Engineering and use context

In the M6 Line the circuit is single-ended with zero feedback, and the tubes operate in pure Class A. According to Audio Note, this topology needs no phase splitter, a stage the company associates with crossover distortion. A 6X5 tube rectifier sits in the power supply, which is based on the M10 Galahad PSU. Voltage regulation is by an ECL82, and a 5651 is the voltage stabiliser.

Throughout the circuit the company uses its own silver wiring, tantalum resistors, custom electrolytic capacitors and Audio Note (UK) copper foil signal capacitors. Output transformers are designed and manufactured in-house and wound on a UHiB c-core with a copper primary and a silver secondary. Each channel has a dedicated Audio Note (UK) stepped attenuator in place of separate volume and balance controls, and the company states that this gives closer channel balance than conventional potentiometers. A balanced output circuit is included as well.

On the M6 Phono the same line stage is joined by a moving magnet phono stage with three 5670 tubes, copper foil signal capacitors and pure silver wiring. That phono stage has its own dedicated tube-regulated and tube-rectified power supply.

Pairing

A power amplifier with line-level inputs is required. The balanced output circuit allows connection to power amplifiers with balanced inputs. An external MM phono stage is needed for vinyl unless an M6 Phono version is chosen.

Alternatives

The Audio Note (UK) M8 Line is the Level 5 preamplifier above it, with an ECC82 or 6189 and a 6463 in the line stage.

Specifications

  • Model name

    M6 Line

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    126

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    100 000 + 47 000 (Phono)

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    <10

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    140 x 440 x 410 (Pre) + 140 x 440 x 410 (PSU)

  • Weight (kg)

    16 (each)

  • Official link