Hifiverse

Preamplifiers - Audio Note M3

Description, images, technical data and specifications

Audio Note M3
Image source - (c) Audio Note

The M3 is a tube preamplifier made in England by Audio Note (UK). It sits above the M1 and M2 and below the M5, M6, M8, M9 and M10. Five versions are offered - M3 Line, M3 Line Balanced CD Input, M3 Phono, M3 Phono Balanced CD Input and M3 RIAA - covering a line-only unit, units with a built-in moving magnet stage and a standalone RIAA unit.

Key specs that matter

Input impedance is 100K ohms on the line inputs and 47K ohms on the phono input. Input sensitivity is 126 mV for 1 V of output. Output impedance sits below 10 ohms. The chassis measures 140 mm high, 440 mm wide and 410 mm deep and weighs 16 kg. Mains input covers AC 100-120 V and 220-240 V at 50/60 Hz. The front panel is offered in anodised aluminium or in black acrylic, and the Line Balanced CD Input and Phono Balanced CD Input versions share this case.

Engineering and use context

Its line section runs on an ECC82 and a 5687WB, and in the moving magnet phono version three GE 5670 tubes make up the phono stage. The power supply is tube rectified by a 6X5 and is based on the supply of the M10 Galahad, with an ECL82 used for voltage regulation and a 5651 acting as a voltage stabiliser. The circuit works in Class A only, uses no global feedback and follows a single-ended layout, a set of choices Audio Note applies from the M1 through to the M10. Internal wiring is Audio Note (UK) copper, signal capacitors are the brand's copper foil type, and the electrolytic capacitors are custom made. Audio Note fits a mix of standard resistors and its own tantalum resistors in key positions. The output transformers are custom Audio Note (UK) parts with I-E M4 cores and copper windings, and the M3 Line models have a balanced output circuit. Compared with the M2, the M3 moves to a wider case and more than doubles the weight.

Pairing

The Balanced CD Input versions add a balanced connection for a CD player or digital source, while the Phono versions take a moving magnet turntable directly. The balanced output circuit on the Line models suits power amplifiers with balanced inputs, and the low output impedance lets the M3 drive the input stage of a following amplifier without a buffer.

Alternatives

The Audio Note M5 keeps the same input sensitivity and case size but uses a line stage of ECC82 and 5687, output transformers wound in copper on HiB C-cores, and SILMIC filter capacitors.

Specifications

  • Model name

    M3

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    18

  • Input sensitivity (mV)

    126

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    100 000 + 47 000 (Phono)

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    <10

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    140 x 440 x 410

  • Weight (kg)

    16

  • Official link