The ModWright LS 99 is a balanced tube line stage made by ModWright Instruments and assembled by hand in the USA. It works in pure Class A and uses an external outboard power supply with tube rectification and solid-state regulation. In the ModWright catalogue it is positioned under the LS300.
Key specs that matter
Gain is 11 dB, input impedance is 30 kohm and output impedance is 100 ohm. The maker gives a frequency response of 20 Hz to 150 kHz flat and a noise floor of minus 110 dB unweighted. Connections start with two XLR input pairs, three RCA input pairs and one extra RCA home theater bypass input. On the output side it offers two balanced XLR sets and two RCA sets, and dual 12 V trigger outputs are fitted. The preamplifier measures 267 mm wide, 114 mm high and 305 mm deep at 7.7 kg, and the outboard supply is 178 x 229 x 76 mm (W x D x H), weighing 5 kg.
Engineering and use context
Its signal path relies on tubes of the 6922 family, which also accepts 6DJ8, 7308 and E88CC types, while rectification is handled by a 5AR4 or GZ34 tube. The two chassis are linked by a 1.2 m umbilical with 8-pin connectors, which keeps the power transformer out of the audio enclosure. The remote control handles volume, mute and the trigger outputs. Through the home theater bypass, an AV processor can use the same power amplifier and loudspeakers, passing its signal at a fixed level while the stereo inputs remain under the LS 99 volume control. The two sets of outputs make it possible to drive a pair of power amplifiers, for example for bi-amping, or a power amplifier and an active subwoofer at the same time.
Pairing
The low output impedance means the LS 99 can drive long interconnects and power amplifiers with a range of input impedances. The balanced topology is best used with a power amplifier that has XLR inputs, while the RCA outputs cover single-ended designs. The triggers can switch on power amplifiers together with the preamplifier. DACs and streamers with XLR outputs connect to the two balanced inputs, and a tuner or phono preamplifier can use the RCA sockets. The input impedance presents a light load for most source components, including tube DACs that have a relatively high output impedance.
Alternatives
The ModWright LS300 is the larger dual mono balanced tube line preamplifier from the same maker, specified at minus 115 dB noise.