The TAD-M2500TX is a stereo power amplifier from Technical Audio Devices Laboratories (TAD) of Japan. Announced in March 2025, it belongs to the TAD Evolution series and is intended for the Evolution loudspeakers. It replaces the earlier M2500, and compared with that model the circuit layout, the power transformers and the machined aluminium chassis were redesigned. US retail price is USD 37,995.
Key specs that matter
Power output is 550 W per channel at 1 kHz into 4 ohms. Rated distortion is less than 0.05% at 1 kHz, 275 W, 4 ohms. Frequency response is 10 Hz - 50 kHz (+0/-3 dB), signal-to-noise ratio is 112 dB or higher and gain is 29.5 dB. Input sensitivity and impedance are 1.5 V / 100 kohms for the balanced XLR input and 0.75 V / 50 kohms for the unbalanced RCA input. Versions are made for AC 120 V, 60 Hz and AC 220 - 230 V, 50/60 Hz. Power consumption is 250 W, with 0.5 W in standby. Dimensions are 440 x 170 x 467 mm (W x H x D), and weight is 42 kg.
Engineering and use context
Each channel uses a BTL (bridge-tied load) design, in which two physically and electrically separate amplifiers are connected in a balanced configuration from the input to the output stages. Left and right channels have separate power supply circuits and transformers, and TAD states that the positive and negative output signals stay symmetrical.
Twin high-capacity toroidal transformers supply the analogue power supply circuit. Their internal coil is connected directly to that circuit, and the cross-section of the transformer core was changed to circular for tighter contact between core and coils, with less leakage magnetic flux and vibration. Parallel winding keeps load fluctuations low, and TAD's own 33,000 µF electrolytic capacitors form the reservoir.
Its output stage operates in class D. Power MOSFETs with ultra-low on-resistance in leadless packages are used, and no conventional heat sinks are needed.
The chassis is machined from a 90 kg solid block of aluminium and has no joints. According to TAD, this mass also helps stabilise the ground potential. Feet with a spike structure stop external vibration from travelling into the amplifier.
Pairing
A bi-amping option is offered for compatible speakers, with one M2500TX on the tweeter terminals and a second on the woofer terminals. The matching speakers are the TAD Evolution models. A preamplifier with balanced XLR or unbalanced RCA outputs is required.
Alternatives
The TAD-M1000TX is the smaller Evolution stereo power amplifier, rated at 500 W at 1 kHz into 4 ohms and weighing 29 kg.