Hifiverse

Power amplifiers stereo — Audia Flight STRUMENTO n° 4 Signature

Description, images, technical data and specifications

Audia Flight STRUMENTO n° 4 Signature
Image source - (c) Audia Flight

The STRUMENTO n° 4 Signature is a two-channel power amplifier from Audia Flight of Civitavecchia, Italy. It belongs to the Strumento Signature Series, where only the STRUMENTO n° 8 Signature monoblocks sit above it. A golden plaque on the front identifies the Signature version, and the finish is silver or black.

Key specs that matter

Output power is 300 W into 8 ohms, 600 W into 4 ohms and 1,000 W into 2 ohms per channel (RMS). Gain is 29 dB and input sensitivity is 1.41 V RMS. Frequency response is 0.3 Hz - 1 MHz (1 W RMS, -3 dB), and slew rate is above 200 V/µs into 8 ohms. THD is below 0.05% and S/N ratio is 110 dB. Input impedance is 7.5 kohms on both balanced and unbalanced inputs. Damping factor is above 1,000 at 8 ohms. Power consumption is under 1 W in standby, 400 W with no signal and 1,000 W at 260 W RMS into 8 ohms with both channels driven. It measures 450 x 280 x 500 mm (W x H x D) and weighs 103.5 kg.

Engineering and use context

Audia Flight uses fully balanced circuitry with Mundorf capacitors, Dale resistors and high-frequency Reed relays. Its core gain stage is the company's proprietary Class A current-feedback design, enclosed in an aluminium shell and embedded in epoxy resin. A 320,000 µF capacitor bank is installed, and the PCBs carry extra gold plating.

Each channel has a dual-mono supply with two high-current sections and four independent stabilised stages, two for the input and two for the current-feedback circuitry. Ultra-fast rectifiers and low-impedance capacitors are used. Two 150 VA toroidal transformers supply the main audio stages, and a separate 15 VA transformer powers logic and protection. For the output stage there is a custom-built 3,000 VA transformer, sealed in epoxy resin and protected by twin ferromagnetic shields. All power transformers sit on a separate, mechanically isolated chassis.

Instead of fuses in the output stage, microprocessor-monitored current sensors provide protection. Its chassis is cast aluminium, CNC-machined, hand-polished, shot-peened, anodised and silk-screened.

Pairing

A line-level preamplifier with balanced or unbalanced outputs is required. The amplifier is rated into loudspeaker loads down to 2 ohms.

Alternatives

Audia Flight's STRUMENTO n° 4 is the standard stereo power amplifier of the Strumento Series on which this Signature version is based.

Specifications

  • Model name

    STRUMENTO n° 4 Signature

  • Input sensitivity (mV)

    1410

  • Input impedance (balanced) (Ω)

    7500

  • Input impedance (single-ended) (Ω)

    7500

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    300

  • Output power (4Ω) (W)

    600

  • Gain (dBu)

    29

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    110

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    < 0,05

  • Max power consumption (W)

    1000

  • Damping factor

    >1000

  • Dimensions (mm)

    450x280x500

  • Weight (kg)

    103.5

  • Official link

More components