The RMB-1587MKII is a seven-channel Class AB power amplifier from Rotel for multichannel home theatre systems, built for custom installation. As a MKII model it has circuit and component upgrades in both the power supply and the amplifier stages compared with the original RMB-1587. Rotel itself was founded in Japan in 1961 by a family with an interest in music, and makes its toroidal power transformers in its own factory.
Key specs that matter
Continuous output is 155 W per channel into 8 ohms and 250 W per channel into 4 ohms with all seven channels driven, and 335 W per channel into 4 ohms with two channels driven. FTC ratings are 165 W per channel into 8 ohms with seven channels driven and 210 W per channel with two driven. THD is below 0.03% (20 Hz - 20 kHz), as is intermodulation distortion. Frequency response is 10 Hz - 100 kHz (+0 dB, -3 dB), signal-to-noise ratio 111 dB (IHF A), gain 26.6 dB, crosstalk better than 55 dB and damping factor 330. Input sensitivity is 3.4 V on XLR at 50 kohms and 1.61 V on RCA at 12 kohms. Power consumption is 1400 W. The 5U chassis measures 431 x 237 x 456 mm, with a 221 mm front panel, and weighs 37.6 kg.
Engineering and use context
According to Rotel, the RMB-1587MKII differs from multichannel amplifiers whose output drops when several channels are driven at once, and its ratings are given with all seven channels working. Two high-current, low-emission toroidal transformers supply an array of eight high-efficiency bulk storage capacitors. Slit foil capacitors are used as well.
Cooling is by four thermostat-controlled, variable-speed low-noise fans, and a rear switch sets them to Fan Auto or Fan Off. Every channel has both an XLR balanced and an RCA input, with automatic switching between them. A 12 V trigger input and output allows power control from an AV processor or receiver. Rack mounting hardware for standard 19-inch racks is included in some regions. Finishes are black and silver.
Pairing
Loudspeakers of 4 ohms nominal or higher are required. The XLR inputs match AV processors with balanced pre-outs, and the RCA inputs match the pre-outs of AV receivers. Seven channels cover a 7.1 or 5.1.2 layout.
Alternatives
The Rotel RMB-1585MKII is the five-channel Class AB version, rated at 210 W per channel into 8 ohms and 340 W into 4 ohms with all channels driven.