The MQ-88uC is a stereo tube power amplifier from Luxman of Japan, a company founded in Osaka in 1925. Luxman has made tube amplifiers without a break since the SQ-5A integrated amplifier of 1961, and the MQ-88uC is modelled on the MQ-60 of 1969. It is the partner of the CL-38uC tube control amplifier. Its main chassis has a dark brown finish instead of the black of the MQ-88u, to match Luxman's wood-cased products, with a hairline-finished aluminium top panel and matt black die-cast aluminium power transformer housings.
Key specs that matter
Rated output is 25 W + 25 W into 4, 8 or 16 ohms. Input sensitivity is 890 mV for 25 W and input impedance is 32 kilohms. Frequency response is 20 Hz - 20 kHz (+0, -0.5 dB) and 10 Hz - 100 kHz (+0, -3.0 dB). THD is 0.1% (1 kHz, 1 W) and 0.5% (20 Hz - 20 kHz, 1 W), and S/N ratio (IHF-A) is 105 dB. Tube complement is two ECC83S, two ECC82 and four KT88. Power consumption is 170 W, or 140 W with no signal. The amplifier measures 440 x 184 x 230 mm (W x H x D) and weighs 16.1 kg.
Engineering and use context
Each channel has a paralleled first stage, a driver stage with Mullard circuitry and a Mullard-compatible push-pull output stage. All tubes come from JJ Electronic of Slovakia, and the KT88 output tubes run in triode connection, which according to Luxman gives longer tube life. Every unit undergoes a final performance check after a 48-hour aging process following assembly.
Luxman's earlier classic amplifiers used OY15 type output transformers with die-cast aluminium housings, and these have been redesigned and reproduced in their original shape. The power supply combines an EI type power transformer with custom designed blocking capacitors. Coupling capacitors are Nichicon high-voltage metallized polypropylene film types, and the internal wiring has been shortened.
A variable input mode with volume adjustment is built in. In this mode the signal bypasses the input section, and a source such as a CD player connects directly to the output section.
Pairing
The matching control amplifier is the CL-38uC. Loudspeakers connect to the 4, 8 or 16 ohm terminal that matches their nominal impedance. The speaker terminals accept Y-lugs up to 14.5 mm wide.
Alternatives
The MQ-300 is Luxman's stereo tube power amplifier with single-ended TA-300B direct heated triodes and an output of 8 W + 8 W.