The M23 is a stereo power amplifier from NAD's Masters series, launched in January 2022 at USD 3,499, GBP 2,999 or EUR 3,499. It combines Purifi Eigentakt amplification with NAD's HybridDigital design and runs either as a stereo amplifier or bridged into mono. NAD now lists the original model in its archive, and an M23 V2 followed in August 2025 at USD 3,999.
Key specs that matter
Rated output power in stereo mode is above 200 W into 8 ohms and above 380 W into 4 ohms per channel. Bridged, it exceeds 700 W into 8 ohms (20 Hz - 20 kHz). Clipping power is above 210 W (1 kHz, 0.1% THD, 8 ohms), or above 770 W bridged. IHF dynamic power is 260 W into 8 ohms in stereo and 1017 W in bridge mode. Peak output current exceeds 25 A (1 ohm, 1 ms), and damping factor is above 800 (8 ohms, 20 Hz - 6.5 kHz). Frequency response is ±0.06 dB in stereo and ±0.054 dB bridged (20 Hz - 20 kHz), with -3 dB at 60 kHz. Signal-to-noise ratio exceeds 101.7 dB (1 W into 8 ohms). Channel separation is above 97 dB via RCA at high gain and above 115 dB via XLR at low gain (1 kHz). Both inputs measure 56 kohms + 200 pF. Dimensions are 435 x 133 x 381 mm (W x H x D), and net weight is 9.7 kg.
Engineering and use context
At the core is Purifi's Eigentakt class D technology in a version custom designed by NAD. NAD quotes ultra-low output impedance together with a high damping factor. Instead of a large linear supply, a switch-mode power supply from NAD is used, with reduced weight. Inside the all-alloy chassis with rigid panels sit multi-layer circuit boards, and the case stands on magnetic iso-point feet.
Balanced XLR and single-ended RCA inputs are both present, and the active one is selected automatically. A three-position gain switch sets 19, 23.9 or 29.2 dB in stereo and 25.1, 30 or 35.2 dB in bridge mode. Input sensitivity for 200 W into 8 ohms is accordingly 4.5 V, 2.5 V or 1.4 V. A 12 V trigger input is provided for system integration. Two M23 units can run as bridged monoblocks, and an M23 in bridge mode can also be combined with a bridged NAD M33 for 700 W per channel.
Pairing
A preamplifier with a balanced XLR or single-ended RCA output is required. NAD's matching preamplifiers are the M66 and the C 658. For bridged operation, NAD rates the M23 into an 8 ohm loudspeaker load.
Alternatives
The NAD C 298 is a lower-priced stereo power amplifier from the Classic series that also uses Purifi Eigentakt modules.