Hifiverse

Power amplifiers stereo - NAD M28

Description, images, technical data and specifications

NAD M28
Image source - (c) NAD

The M28 is a seven-channel power amplifier from NAD, the Canadian electronics brand of Lenbrook. Announced in August 2020 as the replacement for the M27, it was the first multichannel amplifier with Purifi Eigentakt technology, which NAD had introduced shortly before in its M33. NAD presents it as a foundation for advanced home theatre systems.

Key specs that matter

Rated power is 200 W per channel into 8 ohms and 340 W into 4 ohms (20 Hz - 20 kHz, all channels driven). With two channels driven, FTC power is 220 W into 8 ohms and 400 W into 4 ohms. IHF dynamic power is 280 W into 8 ohms with all channels driven, 560 W into 4 ohms and 500 W into 2 ohms with two channels driven. Rated THD is 0.003% or less (20 Hz - 20 kHz, 250 mW to rated power) and 0.0005% at half rated power. Signal-to-noise ratio is above 102 dB balanced and above 97 dB single-ended (A-weighted, ref. 1 W). Frequency response is ±0.1 dB from 20 Hz to 20 kHz and -3 dB at 3 Hz and 60 kHz. Damping factor is above 750 (8 ohms, 50 Hz and 1 kHz). Input sensitivity is 1.3 V for rated power, voltage gain is 29.5 dB, and input impedance is 47 kohms balanced, 23 kohms single-ended. Gross dimensions are 435 x 156 x 380 mm, and shipping weight is 21.2 kg.

Engineering and use context

Eigentakt amplifier technology is manufactured by NAD under licence from Purifi and combined with NAD's HybridDigital architecture. NAD quotes a wide, consistent frequency response into varying speaker loads.

Each channel has balanced XLR and single-ended RCA inputs with its own SELECT switch and PROTECT LED. If one channel goes into protection, the others keep working. Speaker connections are gold-plated, colour-coded high-current binding posts that take banana plugs, bare wire or pins. A +12V trigger input allows remote switching from a processor or preamplifier, and auto standby is set to 30 minutes without signal. Magnetic feet are supplied.

Pairing

Loudspeakers rated at 4 ohms minimum are required. A surround processor or preamplifier with seven balanced or single-ended outputs is the source, and its 12 V trigger output can switch the M28.

Alternatives

The CI 8-150 DSP is NAD's eight-channel power amplifier for custom installation.

Specifications

  • Model name

    M28

  • Input sensitivity (mV)

    1300

  • Input impedance (balanced) (Ω)

    47 000

  • Input impedance (single-ended) (Ω)

    23 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    220

  • Output power (4Ω) (W)

    400

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    3

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    >102

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    ≤0.003

  • Max power consumption (W)

    N/A

  • Damping factor

    >750

  • Dimensions (mm)

    435 x 156 x 380

  • Weight (kg)

    21.2

  • Official link

More components