The № 536 is a fully discrete monaural power amplifier from Mark Levinson, the American high-end brand of Harman. Announced at CES 2015 as the successor to the No. 532, it follows the company's Pure Path circuit design, and Mark Levinson cites classic models such as the No. 33 and ML-2 as reference points. The dual-monaural № 534 uses the same design.
Key specs that matter
Rated output is 400 W RMS into 8 ohms (20 Hz - 20 kHz, <0.3% THD) and 800 W into 4 ohms, with 2-ohm stability. Frequency response is 10 Hz - 20 kHz (±0.2 dB). S/N ratio is >85 dB (ref. 2.83 V RMS). Voltage gain is 26 dB, and 142 mV RMS at the input gives 2.83 V RMS at the output. Input impedance is 60 kohms balanced and 30 kohms unbalanced. There is one balanced and one single-ended input. Mains supply is 100, 120 or 230 V, factory-set, with a 1,500 W rating. It measures 451 x 197 x 508 mm (W x H x D, height with feet) and weighs 45.4 kg.
Engineering and use context
Its signal path is discrete, direct-coupled and fully balanced, with no capacitors in it. Mark Levinson uses a fully differential class AB architecture that operates in class A for most listening conditions, and the voltage gain and driver stages run entirely in class A. Very high open-loop linearity and very high bias current are the core principles, so very little negative feedback is applied.
At the input, matched-pair, low-noise dual JFETs are connected in a double cascode configuration to bipolar transistors, with folded cascodes. Discrete TO-126 bipolar pre-drivers follow. Each amplifier contains 24 TO-264 bipolar output transistors rated at 15 A, 260 V and 200 W, plus 24 TO-220 bipolar driver transistors (230 V, 70 MHz). Tantalum nitride thin-film resistors are used in gain-setting and feedback locations, and film capacitors in critical filtering positions. Layout is mirror-image symmetrical.
A custom low-noise toroidal transformer, shielded and encapsulated, has separate secondary windings for each output stage. The supply uses 16 TO-220 Schottky rectifiers (40 A, 250 V) and 36 filter capacitors totalling 169,200 µF.
There are two pairs of Hurricane loudspeaker outputs. Control I/O comprises Ethernet, RS-232, trigger in and out, USB-A and mini USB, with monitoring and configuration via a web page. The chassis is 6000-series extruded and machined aluminium. Design is in Shelton, Connecticut, and assembly is by hand in Massachusetts.
Pairing
One № 536 per loudspeaker is required for stereo. The matching preamplifier is the dual-monaural № 526.
Alternatives
The ML-50 is Mark Levinson's limited-edition monaural Pure Path amplifier, built in 100 packages.