The ML-50 is a limited-edition monaural power amplifier that Mark Levinson announced on 4 January 2022 for the 50th anniversary of the brand. Production is limited to 100 pairs globally, with sequentially serialised pair numbering and badging, and each system pair was priced at USD 50,000, with retail availability from the fourth quarter of 2022. Its name refers to the ML-2, the first Mark Levinson power amplifier. Design and engineering took place at the Harman Engineering Center of Excellence in Northridge, California, and the amplifier is built by hand in the USA.
Key specs that matter
Rated output is 425 W RMS into 8 ohms and 850 W RMS into 4 ohms (20 Hz - 20 kHz), and the amplifier is stable into 2 ohms. Voltage gain is 26 dB, with 142 mV RMS at the input giving 2.83 V RMS at the output. Frequency response is 10 Hz - 20 kHz (+0/-0.2 dB), and signal-to-noise ratio is above 85 dB (ref. 2.83 V RMS). Input impedance is 60 kohms balanced (XLR) and 30 kohms single-ended (RCA). Power consumption is 560 W on idle, with a 1,500 W mains rating and standby modes of 65 W and 5 W. Dimensions are 197 x 438 x 533 mm (H x W x D), and net weight is 52.2 kg.
Engineering and use context
Its audio circuit uses the № 536 platform and Mark Levinson's Pure Path topology with discrete components. Class A output is 20 W into 8 ohms, more than four times that of the earlier design, and output-stage bias was doubled to lower distortion. High-voltage supply capacitance rose by 50%, from 8,800 µF to 13,200 µF, and the main high-current supply went from 169,200 µF to 206,800 µF. Its Schottky rectifiers were also reconfigured. Mark Levinson says the toroidal transformer is shielded and encapsulated to minimise electrical and mechanical noise.
Large solid aluminium front handles come from the № 20 series, outrigger feet from the № 33 and № 33H, and the glass front panel with a red backlit logo from the № 53. A clear glass top cover exposes the circuit boards, with internal lighting switchable to red, white or off. Cooling is by external heat sinks and twin-channel venting in the top panel, and the vibration-damping, mechanically isolated feet add convection cooling. Connections are one XLR input, one RCA input, two pairs of Hurricane binding posts, Ethernet, RS-232 and a 12 V trigger input and output. Three cartons on a wooden pallet hold two amplifiers, two 3 m power cords, white gloves and a microfiber cloth.
Pairing
A preamplifier with balanced XLR or single-ended RCA outputs is required. The trigger connectors allow switch-on together with the preamplifier. Both pairs of binding posts allow bi-wiring.
Alternatives
The № 536 is Mark Levinson's fully discrete monaural amplifier and the platform of the ML-50.