Hifiverse

Power amplifiers mono — Accustic Arts MONO VI

Description, images, technical data and specifications

Accustic Arts MONO VI
Image source - (c) Accustic Arts

The MONO VI is a mono power amplifier from Accustic Arts of Lauffen, placed in the reference class of the company's range and handmade in Germany. According to Accustic Arts, the output power was increased once again in response to numerous customer requests for more power. Its case has the same dimensions as the stereo AMP VI. US prices have been USD 104,990 with chrome fittings and USD 107,990 with gold, in silver or black anodised aluminium, with gold as a further option.

Key specs that matter

Rated power output at THD+N 1% is more than 1,600 W into 2 ohms, more than 1,500 W into 4 ohms and more than 950 W into 8 ohms. Minimum loudspeaker impedance is 2 ohms. Voltage gain is 30.0 dB. Input impedance is 2 x 16 kohms on the balanced XLR input and 15 kohms on the unbalanced RCA input. Signal-to-noise ratio is -96 dBA (ref. 6.325 V), and THD+N is 0.002% into 4 ohms at 1 kHz and 10 W. Power consumption without load is approx. 125 W. Dimensions are 328 x 530 x 545 mm (H x W x D), weight is approx. 74 kg, and the flight case adds 22 kg.

Engineering and use context

Twenty selected MOS-FET output transistors make up the output stage, whereas the stereo AMP VI uses 40 of them for its two channels. Magnetically shielded and encapsulated toroidal core transformers supply it, and the power supply capacity is more than 110,000 µF, in capacitors made in Germany. Contact surfaces of the components are gold-plated to improve contact resistance. Generously dimensioned heat sinks keep the operating temperature constant and low.

Accustic Arts specifies a very high damping factor and adds its own damping factor linearization, which is switchable. An integrated protective circuit acts against clipping, HF oscillations, overtemperature and too high DC offset. Integrated switch-on current limitation is also part of the design. Both a balanced XLR input and an unbalanced RCA input are present, and the inputs are switchable.

Each unit has a massive, resonance-optimised aluminium housing. Its inlay is massive brass, high-gloss polished and chromed. An AC mains cable and two replacement fuses come with the amplifier.

Pairing

A preamplifier with a balanced XLR or unbalanced RCA output is required. Two MONO VI units are needed for stereo. The gold-plated WBT speaker terminals allow bi-wiring or bi-amping.

Alternatives

The MONO IV is the smaller mono power amplifier in the Accustic Arts REFERENCE-SERIES, rated at up to 510 W into 8 ohms.

Specifications

  • Model name

    MONO VI

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    16 000

  • Input impedance (single-ended) (Ω)

    15 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    950

  • Output power (4Ω) (W)

    1500

  • Gain (dBu)

    30

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    96

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    0.002

  • Max power consumption (W)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    328 x 530 x 545

  • Weight (kg)

    74

  • Official link

More components