Hifiverse

Power amplifiers mono - VTL Lohengrin Reference

Description, images, technical data and specifications

VTL Lohengrin Reference
Image source - (c) VTL

The Lohengrin Reference is a tube mono power amplifier from VTL of Chino, California, positioned after the Siegfried Reference monoblock and the S-400 Reference stereo amplifier. VTL states that development took five years. Each chassis keeps the driver stages and power supply of the Siegfried and adds an output stage with eight output tubes.

Key specs that matter

Output power is 400 W in tetrode mode and 200 W in triode mode (20 Hz - 20 kHz, into 5 ohms), with THD below 2.5% at rated power in either mode. The tube complement per monoblock is 1 x 12AT7, 2 x 12BH7 and 8 x 6550 or KT-88, operating in class AB1. Optimal load range is 4 - 8 ohms. Inputs are one balanced XLR and one single-ended RCA, and the output is one pair of 5-way binding posts. Input impedance is 47 kohms, input sensitivity varies between 1 and 2 V depending on the DF setting, and balanced input CMRR is 60 dB. Signal-to-noise ratio is -110 dB (120 Hz). Each unit measures 29 x 49 x 50 cm (W x D x H) and weighs 77 kg net.

Engineering and use context

Input and driver stages are fully balanced and differential, so a single-ended input signal still produces a balanced signal at the output. There is zero global negative feedback, with a shorter feedback loop instead, and VTL specifies the amplifier as unconditionally stable without capacitor compensation. Bandwidth extends to 100 kHz (-1 dB). A user-adjustable DF control varies output impedance and damping factor.

According to VTL, the lower output impedance of the eight-tube stage reduces the step-down needed to the loudspeaker load and allows a simpler output transformer. That transformer is a balanced, heavily interleaved multi-section Reference design of VTL's own. Plate and screen supplies are precision-regulated and adjustable, input and driver circuits have a discrete regulated supply, and a regulated bias supply holds the output tube operating point under normal AC power fluctuations.

A microprocessor controls tetrode/triode switching, automatic bias, in-rush current limiting and several redundant layers of fault sensing against output tube failure. Standby mute reduces tube current to extend tube life, and a bi-directional RS-232 interface provides control and diagnostics. Mundorf silver oil capacitors are used throughout the signal path, and the power supply capacitors have film bypasses.

Pairing

A preamplifier with a balanced XLR output connects directly to the XLR input. Loudspeakers within the 4 - 8 ohm load range are required.

Alternatives

The Siegfried Series II Reference is the other VTL Reference monoblock in the current range.

Specifications

  • Model name

    Lohengrin Reference

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Max current (A)

    N/A

  • Output power (8Ω) (W)

    400 (tetrode), 200 (triode) at 5 Ohm

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (0% global feedback) (%)

    N/A

  • Total Harmonic Distortion + Noise (100% global feedback) (%)

    N/A

  • Max power consumption (W)

    900

  • Damping factor

    N/A

  • Dimensions (mm)

    290 × 490 × 500

  • Weight (kg)

    77

  • Official link

Related content

More components