Hifiverse

Integrated amplifiers — Rotel Michi X5 Series 2

Description, images, technical data and specifications

Rotel Michi X5 Series 2
Image source - (c) Rotel

The Michi X5 Series 2 is the more powerful of the two stereo integrated amplifiers in Rotel's flagship Michi range. It is a Class AB design with an 8-channel ESS SABRE DAC, an MM/MC phono stage, aptX HD Bluetooth and a PC-USB input with full MQA hardware decoding.

Key specs that matter

Output is 350 W per channel continuous into 8 ohms and 600 W per channel maximum into 4 ohms. THD is below 0.009%, intermodulation distortion below 0.03% and the damping factor 350 (20 Hz - 20 kHz, 8 ohms), with channel separation above 65 dB. Line inputs measure 10 Hz - 100 kHz (+0 dB, -0.6 dB). Signal-to-noise ratio is 102 dB (IHF A) for line and digital inputs and 80 dB for phono. Sensitivity is 380 mV on RCA and 580 mV on XLR, both at 100 kohms, 5.7 mV / 47 kohms for MM and 570 µV / 100 ohms for MC. Line inputs accept 12.5 V before overload. Sources connect to CD, Tuner, Aux 1 and Aux 2 on RCA, one XLR pair, phono, three coaxial and three optical inputs (LPCM up to 24-bit/192 kHz), PC-USB up to 32-bit/384 kHz with Quad DSD and MQA up to 24-bit/384 kHz, and Bluetooth with aptX HD and AAC. Power consumption is 850 W. Its case measures 485 x 195 x 465 mm, with a 177 mm front panel, and weighs 43.8 kg.

Engineering and use context

A linear power supply uses two oversized, shielded, low-noise toroidal transformers manufactured in-house and a bank of four parallel 22,000 µF storage reservoir capacitors. Separate custom supplies isolate the drive current to the critical analogue and digital circuits. Rotel configures the ES9028PRO for stereo, with four DAC channels dedicated to each of the left and right signals.

MM or MC operation of the phono stage is selected by relay in the setup menu. Dual platinum-plated Michi binding posts allow single-wire or bi-wire connection, and a 6.35 mm headphone output is on the front panel. The high-resolution graphic display can be set to show a graphic EQ or a peak power meter. Bass and treble give ±10 dB at 100 Hz and 10 kHz. Rear connections include a pre-out (1 V / 470 ohms), a mono subwoofer output, RS232, Ethernet and 12 V triggers, and a home theatre bypass mode fixes the gain of AUX 1 or XLR for an AV processor.

Pairing

Loudspeakers between 4 and 8 ohms nominal are within the rated range. Its phono stage accepts MM and MC cartridges directly. The binding posts allow bi-wiring.

Alternatives

The Michi X3 Series 2 is the smaller Michi integrated amplifier, rated at 350 W per channel into 4 ohms with a moving magnet phono input.

Specifications

  • Model name

    Michi X5 Series 2

  • Type

    Integrated Amplifier with DAC and Phono

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    4 + 1 (Phono)

  • Input sensitivity (mV)

    380 (RCA) + 580 (XLR)

  • Input impedance (balanced) (Ω)

    100 000

  • Input impedance (single-ended) (Ω)

    100 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    350

  • Output power (4Ω) (W)

    600

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Signal to Noise Ratio (dB)

    102 (Line) + 80 (Phono)

  • Total Harmonic Distortion + Noise (%)

    <0.009

  • Damping factor

    350

  • Dimensions (mm)

    485 x 195 x 452

  • Weight (kg)

    43.8

  • Official link

More components