The RA-1592MKII is a stereo integrated amplifier in Rotel's 15 Series, announced in April 2021 and shipping from May 2021 at GBP 2,295 or USD 3,200. It combines a Class AB power amplifier with a Texas Instruments DAC, a moving magnet phono stage, aptX and AAC Bluetooth and Ethernet control.
Key specs that matter
Continuous power output is 200 W per channel into 8 ohms, and maximum power output is 350 W per channel into 4 ohms. THD is below 0.008%, IMD (60 Hz and 7 kHz, 4 to 1) is below 0.03%, and the damping factor is 600 (20 Hz - 20 kHz, 8 ohms). Frequency response is 10 Hz - 100 kHz (±0.5 dB) on line inputs, 20 Hz - 20 kHz (±0.5 dB) on phono and 10 Hz - 90 kHz (±2 dB) on digital inputs. Input sensitivity is 5.2 mV / 47 kohms for MM phono, 340 mV / 100 kohms for RCA and 540 mV / 100 kohms for XLR, with overload at 52 mV, 3.5 V and 5.5 V. Signal-to-noise ratio (IHF A-weighted) is 80 dB phono, 103 dB line and 102 dB digital. Pre-out level is 1.9 V / 100 ohms. Power consumption is 500 W. Dimensions are 431 x 144 x 425 mm (W x H x D), and net weight is 17.63 kg.
Engineering and use context
For the MKII version Rotel changed the circuit design, optimised the audio signal paths and updated critical power supply components. Its supply uses a toroidal transformer manufactured in-house and an array of slit-foil capacitors.
Digital conversion is by a Texas Instruments 32-bit/384 kHz DAC with tuned output filter circuits. Three coaxial and three optical inputs accept LPCM up to 24-bit/192 kHz. PC-USB runs as USB Audio Class 1.0 up to 24-bit/96 kHz or, with driver installation, Class 2.0 up to 32-bit/384 kHz, and MQA and MQA Studio are supported up to 24-bit/384 kHz. A front USB input accepts iPhone and iPad devices, and the unit is Roon Tested.
Analogue sources connect to CD, Tuner and Aux RCA inputs, a balanced XLR pair and the MM phono input with its ground terminal. Outputs are Speaker A and B, a pre-out, two parallel mono subwoofer outputs and a 3.5 mm headphone jack. At factory default the tone control is disabled, so the bass and treble circuits are bypassed. With HT Bypass enabled, the configurable IN/OUT 12 V trigger becomes an input, and a trigger signal powers the unit on and selects the AUX or XLR input at a fixed volume level. Two further 12 V trigger outputs, RS232 and Ethernet are provided for control systems.
Pairing
Speakers down to 4 ohms are allowed with one pair connected. With Speaker A and B used together, all speakers must be 8 ohms or more. A moving coil cartridge requires a step-up transformer or an external MC phono stage.
Alternatives
The RA-1572MKII is the smaller 15 Series integrated amplifier, rated at 120 W into 8 ohms and 200 W into 4 ohms in Class AB.