Hifiverse

Integrated amplifiers - Lyngdorf TDAI-3400

Description, images, technical data and specifications

Lyngdorf TDAI-3400
Image source - (c) Lyngdorf

The TDAI-3400 is a 2-channel integrated amplifier and audio processor from Lyngdorf Audio, made by SL Audio A/S in Skive, Denmark. Lyngdorf calls it the most powerful product it has yet marketed. One chassis combines the amplifier, a digital input section, a network media player and two optional module slots, for HDMI and for a high-end analogue input module.

Key specs that matter

Rated power is 2 x 200 W RMS into 8 ohms and 2 x 400 W RMS into 4 ohms, with a maximum current output of 40 A. Frequency response is ±0.5 dB from 20 to 20,000 Hz, total harmonic distortion is 0.05% max over the same band, and THD+N is 0.04% at 1 W into 8 ohms and into 4 ohms. Standard digital inputs are one AES/EBU (≤192 kHz/24-bit), two coaxial (≤192 kHz/24-bit), three optical (≤96 kHz/24-bit), one USB B (≤384 kHz/32-bit plus DXD, DSD64 and DSD128) and two USB A. Two single-ended RCA analogue inputs accept a maximum level of 4.0 V (0 dBFS). Outputs comprise stereo analogue RCA, stereo analogue XLR, stereo digital coaxial and a 3.5 mm headphone jack. Measuring 450 x 105 x 360 mm (W x H x D, including connectors), it weighs 8.2 kg and comes in matte black.

Engineering and use context

Its amplifier is based on Lyngdorf's Equibit technology, with fast-switching low-Rds MOSFETs. Heat dissipation is 270 BTU, and the amplifier is passively cooled, without fans or vents. A digital crossover allows three individual output settings.

The optional HDMI 2.1 module has two HDMI inputs and one HDMI output with eARC/ARC (PCM ≤192 kHz/24-bit), CEC integration and HDCP 2.3. An optional high-end analogue input module adds one RIAA phono MM input, two single-ended RCA inputs and one balanced XLR input. Its media player supports internet radio (vTuner), Spotify Connect, Roon Ready, TIDAL Connect, DLNA/UPnP, AirPlay 2 and local file playback over USB, and the MQA Core Decoder is built in. Wireless connections are Bluetooth for remote control and BLE, plus Wi-Fi (802.11 n/ac).

Control runs through a web interface, IP control and an RS232 DB9 port, with an RJ45 Ethernet connector and an SD card slot for backup of filters and settings. It also has a 12 V trigger input and output. The remote control (IR/BLE) is supplied, and rack mounting is optional.

Pairing

Loudspeakers down to 4 ohms nominal are within its rating. A turntable with an MM cartridge requires the high-end analogue input module. A TV connects through the HDMI module with eARC.

Alternatives

The TDAI-1120 is Lyngdorf's smaller streaming amplifier, rated at 2 x 60 W RMS into 8 ohms with a RIAA phono input as standard.

Specifications

  • Model name

    TDAI-3400

  • Type

    Integrated Amplifier with DAC

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    2 + 1 (Phono)

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    200

  • Output power (4Ω) (W)

    400

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    0.05

  • Damping factor

    N/A

  • Dimensions (mm)

    450 x 105 x 360

  • Weight (kg)

    8.2

  • Official link

More components