The A14MKII is the stereo integrated amplifier of Rotel's 14 Series, with 80 W per channel of Class AB amplification, a Texas Instruments DAC, an MM phono stage, a headphone output and aptX and AAC Bluetooth. Roon has certified it as Roon Tested. The MKII version has a fully redesigned digital to analogue circuit and improvements to the power supply and amplifier gain stages. Rotel was founded in Japan and engineers its designs in the UK, and the A14MKII comes in silver or black.
Key specs that matter
Continuous power is 80 W per channel into 8 ohms, and maximum power is 150 W per channel into 4 ohms. THD is below 0.018%, IMD below 0.03% (60 Hz and 7 kHz, 4 to 1), and damping factor is 220. Frequency response is 10 Hz - 100 kHz (±0.5 dB) for line inputs and 20 Hz - 20 kHz (±0.5 dB) for phono. Signal-to-noise (IHF A-weighted) is 100 dB line, 103 dB digital and 90 dB phono. Input sensitivity is 230 mV at 24 kohms for line and 3.4 mV at 47 kohms for MM phono. Preamp output level is 1.2 V. The DAC is a 32-bit/384 kHz converter, and the PC-USB input supports USB Audio Class 2 up to 32-bit/384 kHz plus MQA and MQA Studio. Dimensions are 430 x 93 x 345 mm (W x H x D), and weight is 8.94 kg.
Engineering and use context
Rotel manufactures the oversized toroidal transformer in-house, and it is combined with four high-efficiency slit-foil bulk storage capacitors. Critical components of the DAC section are hand-selected. Circuit boards use symmetrical circuit traces, with metal film resistors and polystyrene or polypropylene capacitors in important signal paths.
Line-level RCA inputs are CD, Tuner, Aux 1 and Aux 2, next to the MM phono input with its ground terminal. Digital inputs are two coaxial and two optical (PCM up to 24-bit/192 kHz), PC-USB and a front USB socket for iPhone, iPad and iPod. The headphone output is a 3.5 mm mini stereo jack. Bass and treble work in 1 dB steps within ±10 dB, and a bypass mode is provided. Two pairs of 5-way binding posts, A and B, are relay-switched for Zone 2 installations. In Home Theater Bypass mode the Aux input is routed at a fixed level with the tone controls disabled, for the front channels of a surround processor or receiver. Ethernet, RS232, 12 V trigger and IR connections are provided for system control, and the network socket also downloads software updates. The front graphic display shows a large volume reading and the incoming stream format. An RR-AX1400 remote control is supplied.
Pairing
One pair of speakers of 4 ohms or higher is required, or 8 ohms or higher when A and B run together. A turntable with an MM cartridge connects directly. The pre-out allows an external power amplifier.
Alternatives
The A12MKII is the smaller Rotel integrated amplifier with lower output power.