Hifiverse

Integrated amplifiers - Aries Cerat Protos

Description, images, technical data and specifications

Aries Cerat Protos
Image source - (c) Aries Cerat

The Ianus Protos is a stereo integrated amplifier in the Ianus Series from Aries Cerat, launched at Munich High End in May 2023. It is based on the bigger Aperio and, like it, uses TriodeFet technology in a single-ended, single-stage topology with no input stage and no driver stage. The UK price is GBP 24,450, and in Hong Kong it was listed at HKD 240,000 in 2024.

Key specs that matter

Power output is 20 W into 8 ohms in full Class A. Maximum gain is 18 dB (tube dependent), power bandwidth is full power at 5 Hz (-3 dB), and the noise floor is -90 dB referenced to 1 V RMS. Two 6J11P-E tubes are installed, and the E280F, E282F, E810F, E180F and D3A are compatible. Volume uses a 61-step relay-switched resistor ladder. On the input side Aries Cerat quotes less than 0.1% THD at 20 V RMS. There are five RCA inputs. A 4-pin XLR headphone output is driven directly by the output stage, with full power available and no impedance matching required. The main unit measures 500 x 490 x 170 mm (W x D x H) and weighs 60 kg, and the PSU unit measures 190 x 310 x 70 mm and weighs 5 kg.

Engineering and use context

From the inputs to the speaker outputs there is only one stage of amplification. According to Aries Cerat, this became possible with an active element that has high linearity, high voltage gain, high current gain and very high input impedance - the TriodeFet. The Aperio and the Protos share a common circuit core, with many differences in PSU design and in the output stage.

Protos means the first. The model started as an exercise in how small and simple an amplifier could be made from the lessons of the bigger TriodeFet amplifiers, and the company calls it the smallest offspring of that technology.

Its volume control is an R2R relay-switched resistor array, used instead of the multitap input transformer (TVC) of the bigger Aries Cerat models. The separate PSU box is the transformer unit and contains the soft start.

Its internal tubes are used for curve creation and are rated for more than 10,000 hours lifespan. Aries Cerat therefore describes the design as practically maintenance free, in contrast to a SET amplifier with big output tubes.

Pairing

Up to five line-level sources connect to the RCA inputs. Headphones require a 4-pin XLR plug.

Alternatives

The Ianus Aperio is the bigger Aries Cerat TriodeFet integrated amplifier, with 35 W into 8 ohms and a 26-step transformer volume control.

Specifications

  • Model name

    Protos

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    5

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    4-pin xlr

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    20

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    18

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    500 x 490 X 170

  • Weight (kg)

    60

  • Official link

More components