Hifiverse

Integrated amplifiers - Aries Cerat Ianus Aperio

Description, images, technical data and specifications

Aries Cerat Ianus Aperio
Image source - (c) Aries Cerat

The Ianus Aperio is a stereo integrated amplifier from Aries Cerat and the third amplifier in its Ianus Series. It debuted at Munich High End in May 2022. Like the other Ianus models it uses TriodeFet technology, here in a single-ended and single-stage topology - there is no input stage and no driver stage, only one stage of amplification from the inputs to the speaker posts. The UK price is GBP 39,950.

Key specs that matter

Power output is 35 W into 8 ohms in Class A. Maximum gain is 21 dB (tube dependent), power bandwidth is full power at 5 Hz (-3 dB), and the noise floor is -90 dB referenced to 1 V RMS. Its tube complement is two E280F, with the E282F, E810F or E180F as alternatives. Volume is set by 26-step TVC (transformer volume control) technology. Inputs are four RCA, one XLR (pin 2 used) and one Direct input for AC link. Main unit dimensions are 420 x 310 x 420 mm (W x D x H) with a weight of 80 kg, and the PSU unit measures 420 x 310 x 140 mm and weighs 35 kg.

Engineering and use context

Unlike the bigger Geminae, which also uses the TriodeFet active element, the Aperio employs it in a single-ended topology. Aries Cerat states that the element combines high linearity, high voltage gain, high current gain and very high input impedance, and that only these properties made a single-stage integrated amplifier possible.

The internal tubes are used for curve creation and are rated for more than 10,000 hours lifespan. For this reason Aries Cerat calls the TriodeFet design practically maintenance free, in contrast to a SET amplifier with big output tubes. The name Aperio means the revealer.

Volume control is implemented by a multitap input transformer. The PSU sits in its own chassis to isolate the stray magnetic fields and EMI generated by the big power supplies. All the separate and independent power supplies, for the TriodeFet stage and for the supporting circuits, are filtered and regulated in this PSU chassis. Two boxes therefore make up one stereo amplifier, with a combined weight of 115 kg.

Pairing

Line sources connect to the RCA or XLR inputs. The Direct input accepts the proprietary Aries Cerat AC link connection.

Alternatives

The Ianus Protos is the smaller Aries Cerat TriodeFet integrated amplifier, with 20 W into 8 ohms and a 61-step relay-switched resistor ladder.

Specifications

  • Model name

    Ianus Aperio

  • Type

    Integrated Amplifier

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    4

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    35

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    21

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    420 x 310 X 420

  • Weight (kg)

    80

  • Official link

More components