Hifiverse

Integrated amplifiers — Accustic Arts POWER III

Description, images, technical data and specifications

Accustic Arts POWER III
Image source - (c) Accustic Arts

The POWER III is an integrated stereo amplifier with a D/A converter from ACCUSTIC ARTS Audio GmbH of Lauffen, Germany. It belongs to the company's TOP series, has an optional phono input and is handmade in Germany. Accustic Arts calls it the All-Rounder.

Key specs that matter

Rated power output (THD+N 0.1%) is 2 x 230 W into 8 ohms, 2 x 370 W into 4 ohms and 2 x 510 W into 2 ohms. Signal-to-noise ratio is 97 dBA (ref. 6.325 V, A-weighted), THD+N is below 0.01% and the damping factor is above 200. Rise and fall time is 34.7 µs into 4 ohms. Analogue inputs are 2 balanced XLR and 4 unbalanced RCA, with an input resistance of 50 kOhms. Digital inputs are 2 coaxial S/PDIF up to 192 kHz/24 bit, 2 optical S/PDIF up to 96 kHz/24 bit and USB up to DSD512 and 32 bit/384 kHz PCM. Left/right signal difference is below 0.2 dB from 0 dB to -20 dB. The chassis measures 145 x 482 x 430 mm (H x W x D) and weighs approx. 23 kg.

Engineering and use context

The amplifier uses a double mono design, and its output stage has 12 selected bipolar output transistors. Power comes from an encapsulated 600 VA toroidal core transformer with separate windings for the preamp section and the power amp section. Power supply capacity is more than 80,000 µF. A generously dimensioned heat sink keeps the operating temperature constant and low. The integrated protective circuit switches the outputs off on clipping, HF oscillations, excessive temperature or excessive DC offset.

On the analogue side, the fourth RCA input (input 3) can be configured as a high-level input, as a SURROUND BYPASS input or as the phono input. A single RCA pre-output with 47 ohms output impedance works as a RECORD output or as a preamp output. Every input has its own level adjustment, and the volume control is microprocessor-controlled. Long-term stable relays and gold-plated speaker terminals are used. A switchable headphone amplifier is integrated, with a 6.3 mm metal jack rated for headphones above 25 ohms.

The full metal housing provides shielding, the front panel is brushed aluminium and the knobs and push buttons are solid chromed brass. An RC II remote control is included. Power consumption is approx. 60 W without load.

Pairing

Loudspeakers of 2 ohms and above are within the rated range. The pre-output allows a power amplifier or an active subwoofer to be added. Its SURROUND BYPASS input allows integration with an AV processor.

Alternatives

The POWER II is the other integrated amplifier in the ACCUSTIC ARTS TOP series, without a D/A converter and rated at 2 x 203 W into 8 ohms (THD+N 1.0%).

Specifications

  • Model name

    POWER III

  • Type

    Integrated Amplifier with DAC

  • Analog inputs (balanced)

    2

  • Analog inputs (single-ended)

    4

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    50 000

  • Input impedance (single-ended) (Ω)

    50 000

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    Yes

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    230

  • Output power (4Ω) (W)

    370

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    97

  • Total Harmonic Distortion + Noise (%)

    < 0,01

  • Damping factor

    200

  • Dimensions (mm)

    145 x 482 x 430

  • Weight (kg)

    23

  • Official link

More components