All
Integrated amplifiers — Accustic Arts POWER II
Description, images, technical data and specifications
Accustic Arts POWER II
Image source — © Accustic Arts
The POWER II is an integrated amplifier from Accustic Arts, a German manufacturer known for uncompromising high-end electronics engineering, built with comprehensive six-input connectivity and a considerable chassis mass. The POWER II brings Accustic Arts' considered engineering to a complete integrated solution.
Key specs that matter
Two balanced XLR inputs and four single-ended RCA inputs are provided. Input impedance is 50k ohms on both connections. Output power is 180W into 8 ohms, rising to 235W into 4 ohms. Signal-to-noise ratio is 97dB, with total harmonic distortion plus noise under 0.015%, and a solid damping factor exceeding 70. At 145 x 482 x 440mm and 23kg, the POWER II represents a serious integrated amplifier commitment reflecting Accustic Arts' uncompromising German build standards.
Sound and use context
Expect substantial power delivery combined with clean measured performance reflecting the solid over-70 damping factor and low sub-0.015% distortion figure, consistent with Accustic Arts' broader uncompromising engineering standards.
Pairing
The comprehensive six-input connectivity comfortably accommodates a source-rich system, and Accustic Arts' own PREAMP V PHONO or TUBE PREAMP V offer natural, brand-coherent preamplifier upgrade paths.
Alternatives
Accustic Arts' broader amplifier catalogue offers alternatives for buyers wanting a separates-based approach instead.
Key specs that matter
Two balanced XLR inputs and four single-ended RCA inputs are provided. Input impedance is 50k ohms on both connections. Output power is 180W into 8 ohms, rising to 235W into 4 ohms. Signal-to-noise ratio is 97dB, with total harmonic distortion plus noise under 0.015%, and a solid damping factor exceeding 70. At 145 x 482 x 440mm and 23kg, the POWER II represents a serious integrated amplifier commitment reflecting Accustic Arts' uncompromising German build standards.
Sound and use context
Expect substantial power delivery combined with clean measured performance reflecting the solid over-70 damping factor and low sub-0.015% distortion figure, consistent with Accustic Arts' broader uncompromising engineering standards.
Pairing
The comprehensive six-input connectivity comfortably accommodates a source-rich system, and Accustic Arts' own PREAMP V PHONO or TUBE PREAMP V offer natural, brand-coherent preamplifier upgrade paths.
Alternatives
Accustic Arts' broader amplifier catalogue offers alternatives for buyers wanting a separates-based approach instead.
Specifications
Model name
POWER II
Type
Integrated Amplifier
Analog inputs (balanced)
2
Analog inputs (single-ended)
4
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
50 000
Input impedance (single-ended) (Ω)
50 000
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
D/A conversion
N/A
Phono MM/MC current-sensing input impedance (Ω)
N/A
Output power (8Ω) (W)
180
Output power (4Ω) (W)
235
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
N/A
Frequency response high +/- 3dB (Hz)
N/A
Signal to Noise Ratio (dB)
97
Total Harmonic Distortion + Noise (%)
< 0,015
Damping factor
>70
Dimensions (mm)
145 x 482 x 440
Weight (kg)
23
Official link
More components
Integrated amplifiers
Accustic Arts POWER III