Hifiverse

8 Most Unusual Japanese Turntables

From a tube-equipped portable to a 330-kilogram machine

8 Most Unusual Japanese Turntables
John Makovsky
John Makovsky

22.11.2026 06:46 | ~6 min read

Japanese engineers love to take an idea to its absolute limit, so turntables turn out to be the ideal field for such experiments. The platter can be suspended on a magnetic cushion, rotation can be provided without any mechanical link to the motor, and the stylus of the cartridge can be replaced by a laser. We have chosen eight extraordinary machines, each with a non-standard engineering solution - the ranking runs from the most affordable turntable to the most expensive.

8. Korg handytraxx tube

Korg handytraxx tube
Korg handytraxx tube. Image source - (c) Korg

Price - 99,000 yen

Format - portable turntable with a built-in speaker | The trick - phono equalizer based on the Nutube

Korg is known for its synthesizers, but it was this company that developed the Nutube together with Noritake - a miniature triode based on vacuum fluorescent display technology. In the compact handytraxx tube this tube is used in the built-in phono equalizer, and the mechanical design has its own surprises too. The turntable is about the size of an A3 sheet and weighs 3 kg. It continues the line of portable turntables for DJs, but in this case it also comes fully equipped for home listening.

7. Yamaha GT-5000

Yamaha GT-5000
Yamaha GT-5000. Image source - (c) Yamaha

Price - 880,000 yen

Format - belt-drive turntable | The trick - short straight tonearm and balanced output

GT stands for the Gigantic & Tremendous principle - everything that affects the sound must be made huge and heavy, and everything unnecessary must be left out. The 546 mm wide cabinet, made of four layers of high-density particle board, weighs 14.3 kg. The dual-layer platter is belt-driven by a 24-pole synchronous motor whose frequency is set by a quartz oscillator, with no speed feedback. XLR outputs are on board - a great rarity in the vinyl world.

6. Audio-Technica Hotaru

Audio-Technica Hotaru
Audio-Technica Hotaru. Image source - (c) Audio-Technica

Price - 1,650,000 yen

Format - all-in-one turntable with built-in speakers | The trick - the platter floats on magnets and glows in time with the music

"Hotaru" means "firefly" in Japanese. The turntable was first shown at Milan Design Week in spring 2025, production was limited to one thousand units worldwide, and regular sales began in December 2025 at 1,650,000 yen. The turntable section does not rest on supports but hangs in the air thanks to the repulsion of powerful magnets. Audio-Technica stresses that this is not only a spectacular trick but also isolation from external vibration, which is what vinyl playback suffers from most. The second feature is the lighting. The light responds to the music on the record, with 20 color palettes and three operating modes to choose from. The speakers are built in, so this is a complete system.

5. ELP LT-master

ELP LT-master
ELP LT-master. Image source - (c) ELP

Price - 1,760,000 yen (1,600,000 yen excl. tax)

Format - laser turntable | The trick - five laser beams instead of a stylus

This turntable, which reads a record with a beam of light, is hand-built in Japan to order and has been in production for many years. There is no stylus at all - two beams track the groove, two more read the signal from the groove walls (left and right channels), and the fifth monitors the height above the record surface. The record is loaded on a sliding tray, like a compact disc, and a remote control is provided. The ELP LT-master plays records from 17 to 30 cm in diameter and varies the speed within 30-50 and 60-90 rpm. The frequency response is impressive - 10 Hz to 25 kHz. There is one limitation - the laser reads black records only.

4. CSPort LFT1M2

CSPort LFT1M2
CSPort LFT1M2. Image source - (c) CSPort

Price - 4,080,000 yen

Format - turntable with a linear tracking tonearm | The trick - air-float platter and tonearm

CSPort fights vibration in two ways - low-frequency vibration is suppressed by mass, and high-frequency vibration by air. The base of the LFT1M2 is a 40 kg granite slab machined to a flatness of 5 microns, like the surface plates used in machine-tool building. Above it, on an air gap of a few tens of microns, floats a brass platter 344 mm in diameter and weighing 28 kg, leaving the bearing only to hold it against lateral displacement. The drive deliberately works without servo control - the company believes that any speed control loop generates noise in the audio band, and relies on the inertia of the platter for stability. The tonearm is a linear tracking design and also floats on air. The assembled turntable weighs more than 100 kg.

3. Yukiseimitsu Audio AP-01

Yukiseimitsu Audio AP-01
Yukiseimitsu Audio AP-01. Image source - (c) Yukiseimitsu Audio

Price - 5,280,000 yen

Format - thread-drive turntable | The trick - non-contact magnetic bearing

Yuki Seimitsu is a small Japanese precision machining plant that makes parts for aviation and space, and it released the turntable as a demonstration of its own capabilities. The aluminum platter of the AP-01, 310 mm in diameter and weighing 4 kg, rests neither on a ball nor on an oil film - the radial bearing here is magnetic, of the repulsion type, with no mechanical contact. Rotation is transmitted by an elastic thread from a brushless DC motor with encoder feedback, and there are three speeds - 33, 45 and 78 rpm. With dimensions of 560 x 196 x 330 mm, the unit weighs 30.2 kg. Since July 2026 the AP-01 with the company's own tonearm costs 5,280,000 yen, and the armless AP-01EM, which accepts up to two third-party tonearms, costs 4,840,000 yen.

2. Esoteric Grandioso T1

Esoteric Grandioso T1
Esoteric Grandioso T1. Image source - (c) Esoteric

Price - 7,700,000 yen

Format - magnetic-drive turntable | The trick - the platter rotates with no mechanical link to the motor

Esoteric released the first turntable in its history for its 35th anniversary - and, unlike many manufacturers, did not choose between direct drive and belt drive. The patented MagneDrive system works quite differently - a magnetic driver rotates next to the platter, and the platter follows it synchronously through the magnetic field, with no physical contact! So there is neither a belt that stretches over time nor a motor under the platter whose vibration is passed straight to the platter assembly (as with direct drive). The unit is supplied with a tonearm, but there is also the armless T1/AL version - slightly cheaper, at 7,150,000 yen. Optional arm bases allow up to three tonearms to be mounted - the kits for SME, Graham, Ikeda and SAEC cost 220,000 yen each.

1. TechDAS Air Force Zero

TechDAS Air Force Zero
TechDAS Air Force Zero. Image source - (c) TechDAS

Format - turntable with an air bearing and vacuum hold-down | The trick - 330 kilograms on an air suspension

Hideaki Nishikawa was already working on turntables at Micro Seiki, and the Air Force Zero became the pinnacle of his lineup. In designing this machine, TechDAS set itself no limits on budget or size - and ended up with a structure measuring 902 x 677 x 335 mm and weighing 330 kg. The platter is a composite - first comes a stack of four layers - 40 cm / 34 kg of SUS 316L stainless steel, another 31 cm / 20 kg of SUS 316L stainless steel, 31 cm / 20 kg of cast alloy and another 31 cm / 20 kg of cast alloy. On top sits a 31 cm tungsten disc weighing 26 kg. The layers are neither bolted nor soldered to one another - they are held together by vacuum, which avoids stress in the metal. As a result, the 40 cm platter rotates on an air bearing, the record is held to it by a vacuum pump, and all this splendor rests on one more air suspension, which ensures complete isolation from vibration. The machine uses belt drive with a heavily modified German three-phase, twelve-pole Papst motor (long out of production). Each phase of the motor is powered by its own 150 W amplifier. The chassis is made of super duralumin, and the base of titanium and steel. The tonearms are mounted on titanium modules. The air bearing tolerance is 8-10 microns. Bravo - this is where the search for the best turntable can come to an end.

Comments