The Smart Phono V2 is a compact MM/MC phono stage from Clearaudio of Erlangen, Germany, placed in the entry-level class of its electronics range. It sits one step above the Nano Phono V2 and is housed in a solid aluminium case. A second version, the Smart Phono Headphone V2, adds a headphone socket on the front panel.
Key specs that matter
Gain at 1 kHz is 34 dB in MM mode and 54 dB in MC mode. Input impedance is 47 kohms in MM mode and 50 ohms, 100 ohms, 500 ohms, 1 kohm or 5 kohms in MC mode, with 150, 250 or 400 pF capacitance in both modes. RIAA accuracy is ±0.3 dB (10 Hz - 100 kHz). Distortion is below 0.004% in MC mode (A-weighted, 1 kHz, -1 dB at maximum gain). Signal-to-noise ratio is 85 dB (A) in MM mode and 72 dB (A) in MC mode, and channel separation is above 90 dB (1 kHz, opposite channel short-circuited). Overload margin is 18 dB in MC mode with the gain control on maximum. Maximum output voltage is 10 V RMS (1 kHz), and output impedance is 75 ohms. Inputs and outputs are unbalanced RCA. Dimensions are 95 x 125 x 34 mm (W x D x H), and weight is approx. 620 g including the power supply.
Engineering and use context
Inside the housing are two separate circuit designs in SMD technology, one for moving-magnet and one for moving-coil cartridges. MM or MC mode is selected on the underside of the unit, where a subsonic filter can also be switched in. Recording characteristic equalisation follows RIAA with time constants of 75 µs, 318 µs and 3180 µs. Clearaudio describes the frequency response as linear.
An external plug-in power supply in a plastic housing powers the stage, rated at ±18 V DC and 300 mA. Power consumption is 2.7 W in operation and 0.0 W when switched off. On the Smart Phono Headphone V2 the same aluminium housing carries a front-mounted 3.5 mm headphone jack. Clearaudio gives a 3-year manufacturer's warranty, valid when the completed warranty card is returned within 14 days of purchase.
Pairing
An amplifier or preamplifier with an unbalanced RCA line input is required. The MM input is for moving-magnet cartridges. Moving-coil cartridges connect to the MC input, with the resistive load set to the value their maker specifies.
Alternatives
The Nano Phono V2 is the smaller Clearaudio phono stage one step below it, also offered as the Nano Phono Headphone V2.