Hifiverse

Phonovorstufen - Clearaudio ABSOLUTE PHONO

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio ABSOLUTE PHONO
Bildquelle - (c) Clearaudio

The Absolute Phono is a moving coil phono stage from Clearaudio of Erlangen, Germany, which the company presents as the world's first active headshell MC phono stage. Part of the gain sits in the tonearm headshell, and the rest is housed in a main chassis with a separate power supply chassis. The European price was EUR 13,500, and silver or black aluminium finishes were offered.

Key specs that matter

Gain is 60 dB at 1 kHz. RIAA equalisation follows the standard curve with a deviation of less than 0.1 dB. Signal-to-noise ratio is 90 dB (A-weighted), channel separation is 100 dB and THD is below 0.001 %. The input is a D-Sub socket. Outputs are balanced XLR with 64 ohms output impedance and unbalanced RCA with 32 ohms. A switching power supply accepts 100 - 265 V AC, 50 - 60 Hz. Consumption is 3.2 W in operation and 0.0 W in off mode. Each chassis measures approx. 240 x 160 x 65 mm, and the weights are approx. 3.25 kg for the preamplifier and 3.20 kg for the power supply. Warranty is 5 years when the warranty card is returned within 14 days of purchase.

Engineering and use context

A small circuit board installed in the headshell of the tonearm amplifies the MC signal at the cartridge. Clearaudio states that this improves the signal-to-noise ratio by approximately 10 dB across the entire audio bandwidth. Power for the headshell amplification stage is routed from the power supply through the main chassis.

At the input Clearaudio uses a current amplification circuit. With it, no load resistance or load capacitance has to be set for the cartridge, and the optimum operating condition is set automatically. No relays or coupling capacitors are used in the signal path. Hand-selected, non-magnetic Clearaudio Silver Glimmer capacitors are used at key points of the circuit.

Its power supply sits in a separate chassis to keep mains-borne interference to a minimum. One multi-function switch selects the On, Off, Mute and Standby modes. The tonearm connects through a special 9-pin connector to the D-Sub input.

Pairing

A Clearaudio tonearm is required, and the circuit works with moving coil cartridges of any brand. A preamplifier or integrated amplifier with a balanced XLR or unbalanced RCA line input is required.

Alternatives

The Clearaudio Statement Phono is a two-chassis phono preamplifier with a fully balanced battery power supply, an output voltage above 12 V, a 12 kg preamplifier and a 22 kg power supply.

Spezifikationen

  • Modellbezeichnung

    ABSOLUTE PHONO

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    500 000

  • Ausgangsimpedanz (Ω)

    64 (XLR), 32 (RCA)

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    < 0.001

  • Abmessungen (mm)

    240 × 160 × 65 (Phono) + 240 × 160 × 65 (Power)

  • Gewicht (kg)

    3.25 (Phono) + 3.20 (Power)

  • Offizieller Link