Hifiverse

Phonovorstufen - Clearaudio NANO PHONO V2

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio NANO PHONO V2
Bildquelle - (c) Clearaudio

The Nano Phono V2 is a compact phono preamplifier from Clearaudio of Erlangen, Germany, for moving magnet and moving coil cartridges. Clearaudio designed it for low-noise signal processing and states that it is unaffected by external interference. The Nano Phono Headphone V2 is the same stage with a 3.5 mm headphone jack on the front panel. Both have an aluminium housing in silver or black.

Key specs that matter

Gain at 1 kHz is 34 dB in MM operation and 54 dB in MC operation. Input impedance is 47 kOhm / 220 pF for MM and individually adjustable for MC. RIAA accuracy is ±0.4 dB from 20 Hz to 50 kHz, with equalisation to the 75 µs, 318 µs and 3180 µs time constants. Distortion is below 0.04 %. Signal-to-noise ratio is 81 dB (A) for MM and 70 dB (A) for MC, and the overload margin is 18 dB in MC mode. Channel separation is above 80 dB at 1 kHz with the opposite channel short-circuited. Maximum output voltage is 10 V RMS (1 kHz), and output impedance is 75 ohms. Inputs and outputs are unbalanced RCA. Power comes from an external plug-in supply rated at ±18 V DC / 300 mA. Dimensions are 85 x 106 x 25 mm (W x D x H), and the preamplifier with its power supply weighs about 500 g. Warranty is 3 years with registration within 14 days.

Engineering and use context

The circuit is built from selected SMD components, which are hand-assembled in Erlangen and tested several times. Clearaudio quotes a signal-to-noise ratio of up to 80 dB as the result.

On the underside, a jumper selects MM or MC operation and a second jumper switches the subsonic filter in or out. DIP switches on the bottom set the input impedance for the cartridge in use.

Power consumption is 2.3 W in operation, below 0.3 W in standby and 0.0 W when switched off. The plug-in power supply has a plastic housing.

Pairing

A turntable with an MM or MC cartridge is required. An amplifier with an unbalanced RCA line input is required.

Alternatives

The Clearaudio Smart Phono V2 is the larger phono preamplifier with MC loads from 50 ohms to 5 kOhm, three capacitance settings and distortion below 0.004 % in MC mode.

Spezifikationen

  • Modellbezeichnung

    NANO PHONO V2

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    47 000 (MM)

  • Ausgangsimpedanz (Ω)

    75

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    < 0.04

  • Abmessungen (mm)

    85 × 106 × 25

  • Gewicht (kg)

    0.5

  • Offizieller Link