The Balance V2 is a phono preamplifier from Clearaudio of Erlangen, Germany, for MM and MC cartridges. Clearaudio aims it at analogue listeners who want to adapt the phono stage precisely to their own setup. The preamplifier and its power supply sit in two separate housings precision-milled from solid aluminium, in silver or, on request, black anodised.
Key specs that matter
Gain at 1 kHz is +46 dB in MM operation and +66 dB in MC operation. Input impedance is 47 kilohms / 270 pF for MM and 500 ohms / 270 pF for MC. RIAA accuracy is ±0.1 dB, harmonic distortion is below 0.001% (IEC A), and signal-to-noise ratio is -78 dB for MM and -79 dB for MC. Overload margin is +23 dB, maximum output voltage is above 12 V at 1 kHz and channel separation is above 92 dB at 1 kHz. Output impedance is 150 ohms balanced (XLR) and 75 ohms unbalanced (RCA). Inputs are RCA and XLR, and outputs are RCA, XLR and a 6.3 mm headphone jack. The preamplifier measures 240 x 145 (158 with RCA) x 62 mm (W x D x H) and weighs approx. 2.3 kg, and the power supply measures 240 x 145 x 62 mm and weighs approx. 1.4 kg.
Engineering and use context
Clearaudio specifies the cutting characteristic equalisation as 75 µs / 318 µs / 3180 µs with two passive filters. XLR or RCA input and MM or MC operation are selected on the underside, as is the subsonic filter at 20 Hz (-6 dB/oct. per channel). The XLR and RCA outputs can be used in parallel, and the RCA inputs and outputs are gold-plated.
On the front panel a rotary knob sets the volume manually, and a button switches to mute or to automatic mode, in which the output level is at maximum. The external power supply has a +21 V DC output and a 1.4 m cable, and the circuit operates on ±18 V DC. Clearaudio states that the separate aluminium housing and an earthing connection reduce interfering mains frequencies. Power consumption is a maximum of 6.6 W in operation and below 0.3 W in standby, and the warranty is 3 years with the warranty card returned within 14 days.
Pairing
A preamplifier or integrated amplifier with a balanced XLR or an RCA line input is required. MC cartridges connect directly, without a step-up transformer. The 6.3 mm output allows direct headphone listening.
Alternatives
The Basic V2 is a Clearaudio phono preamplifier that also adapts to MM and MC cartridges.