Hifiverse

Tonabnehmer - Clearaudio Virtuoso V2

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio Virtuoso V2
Bildquelle - (c) Clearaudio

The Virtuoso V2 is a moving magnet (MM) cartridge from Clearaudio of Erlangen, Germany, and the successor to the Virtuoso Wood. It belongs to the MM V2 series together with the concept V2, Performer V2, Artist V2 and Maestro V2. Every cartridge of the series is made in Germany by Clearaudio's own in-house team.

Key specs that matter

Mass of the complete system is 8.4 g (±0.4 g). Frequency response is 20 Hz - 20 kHz, and output voltage is about 3.6 mV (1 kHz, 5 cm/s). Channel separation is 26 dB and channel balance is 0.4 dB, both at 1 kHz. Tracking ability is 80 µm at a recommended tracking force of 2.2 g (±0.3 g). Coil impedance is 0.66 kOhm (1 kHz) and coil inductance is 400 mH. Clearaudio specifies a load resistance of 47 kOhm and a load capacitance of 100 pF. An aluminium cantilever carries an elliptical stylus, and compliance is 15 µ/mN. The cartridge body is ebony wood. Manufacturer's warranty is 2 years when the warranty card is returned or the product is registered online within 14 days of purchase.

Engineering and use context

Clearaudio's MM Technology V2 uses ebony as a low-resonance housing base. It combines this with a reduction of moving mass, optimised HD grinding of the stylus and damping of the cartridge. Apart from the aluminium-bodied concept V2, every model in the series has a hand-polished ebony body.

Each component part is measured, analysed and hand-selected, and the finished cartridges pass this process several times across four levels. According to Clearaudio, the aim is homogeneity of the two stereo channels and minimal phase and transient distortion.

Its 26 dB separation and 0.4 dB balance compare with 24 dB and 0.8 dB for the Artist V2 and 1.5 dB balance for the Performer V2.

The manual warns that a tracking force of 1 g or less can let the stylus jump out of the groove and that 5 g must never be exceeded. If the cartridge is too light for the counterweight of the arm, Clearaudio offers a spacer plate.

Pairing

A phono stage with an MM input set to 47 kOhm is required. Phono input and tonearm cable together should total about 100 pF. A tonearm that balances an 8.4 g cartridge at the recommended tracking force is required.

Alternatives

The Clearaudio Maestro V2 is the MM V2 model with a boron cantilever, a Shibata stylus, 25 dB separation, 0.3 dB balance and 16 µ/mN compliance.

Spezifikationen

  • Modellbezeichnung

    Virtuoso V2

  • Typ

    MM

  • Nadel

    Elliptical

  • Gehäuse

    Ebony wood

  • Nadelträger

    Aluminium

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    3.6

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Innenwiderstand (Ohm)

    N/A

  • Kanaltrennung (dB / 1,000 Hz)

    26

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    15 μ/mN

  • Empfohlene Abschlussimpedanz (Ohm)

    47 000

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    8.4

  • Offizieller Link