Hifiverse

Tonabnehmer - Clearaudio TALISMAN V2 GOLD

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio TALISMAN V2 GOLD
Bildquelle - (c) Clearaudio

The Talisman V2 Gold is a moving-coil (MC) cartridge from Clearaudio of Erlangen, Germany. Its body is hand-polished ebony with a gold faceplate on the front. Clearaudio now lists the model as the Talisman V2.1 Gold, while its technical data still carry the Talisman V2 Gold name. It is supplied with the common Moving Coil V2 instruction manual of its MC range.

Key specs that matter

Total system weight is 10.6 - 11.2 g. Frequency response is 20 Hz - 20 kHz, and output voltage is 0.5 mV at 5 cm/s. Channel separation is 25 - 30 dB with channel balance below 0.5 dB. Tracking ability is 80 µm at a recommended tracking force of 2.8 g (±0.2 g). Cartridge impedance is 50 ohms. A boron cantilever carries a diamond with the Clearaudio Prime Line cut, and stylus compliance is 15 µ/mN. Coil arrangement is absolutely pivot-symmetrical, and coil material is 24-carat gold. Manufacturer's warranty is 2 years when the completed warranty card is returned to Clearaudio within 14 days of purchase.

Engineering and use context

Inside, the generator uses Clearaudio's patented, fully pivot-symmetrical coil arrangement with eight magnets and gold wire coils.

The V2.1 designation refers to the Micro-HD stylus diamond. According to Clearaudio, this diamond traces the finest details from the record groove.

Clearaudio quotes a typical weight of 10.8 g and presents this low weight, together with its proven boron cantilever, as the engineering achievement of the design. Ebony was chosen for the body because of its high freedom from resonance.

Pairing

A phono stage with a high-gain MC input or a step-up transformer is required. A tonearm that balances an 11 g cartridge at the recommended tracking force is required.

Alternatives

The Clearaudio Stradivari V2.1 has the same 0.5 mV output, 50 ohms impedance, boron cantilever and 24-carat gold coils in a 7.0 g ebony body with a metal inlay.

Spezifikationen

  • Modellbezeichnung

    TALISMAN V2 GOLD

  • Typ

    MC

  • Nadel

    Clearaudio Prime Line

  • Gehäuse

    N/A

  • Nadelträger

    Boron

  • Spulen

    Absolutely symmetrical design

  • Ausgangsspannung (mV@5cm/sec)

    0.5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Innenwiderstand (Ohm)

    50

  • Kanaltrennung (dB / 1,000 Hz)

    25 – 30

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    15μ/mN

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    10.6 – 11.2

  • Offizieller Link