The D-10X is the flagship SACD/CD player from Luxman of Japan and the successor to the D-08u. It was the first product to use the ROHM MUS-IC BD34301EKV converter (as of May 2020), and it also works as a USB, coaxial and optical DAC.
Key specs that matter
Supported discs are SACD, CD, CD-R, CD-RW and MQA-CD. Conversion uses two BD34301EKV chips in monaural mode. Digital inputs are one coaxial, two optical and USB. Over USB the player accepts PCM from 44.1 to 768 kHz at up to 32 bits and DSD from 2.8 to 22.4 MHz, while coaxial and optical inputs take PCM up to 192 kHz/24-bit. Analogue output is 2.4 V at 300 ohms unbalanced and 2.4 V at 600 ohms balanced, or 1.3 V for SACD/DSD. Frequency response is 5 Hz - 20 kHz (+0, -1.0 dB) for CD, 5 Hz - 38 kHz (+0, -3.0 dB) for SACD and 5 Hz - 47 kHz for USB. THD is 0.0018% on CD and 0.001% on SACD, and S/N ratio (IHF-A) is 125 dB on CD and 121 dB on SACD. Dimensions are 440 x 154 x 418 mm (W x H x D), weight is 22.4 kg and power consumption is 48 W.
Engineering and use context
Luxman's LxDTM-i (Disc Transport Mechanism, improved) drive is enclosed in 8 mm aluminium sides that extend to the front and rear panels, with a 5 mm steel top plate. Its mounting forms one structure with the side frame.
The output stage is the fully balanced ODNF-u circuit (Only Distortion Negative Feedback), which made its debut in this player. Instead of conventional output filters it uses a gradual first-order filter in three bands. A composite, loop-less chassis shields the analogue signal from ground impedance changes and magnetic fields.
Power transformer capacity is 27% higher than in the previous flagship, with independent regulators for each circuit. Circuit boards use 100 µm copper foil, gold-plated connections and peel-coat removal of the solder mask. Neutrik XLR terminals carry the balanced output, and a phase invert button swaps pins 2 and 3. Cast iron insulator feet have a density gradient. USB supports isochronous transfer and four Bulk Pet modes, and MQA-CDs and MQA files up to 24-bit are decoded. An FL display with 4x zoom and the RD-29 aluminium remote are included.
Pairing
An amplifier or preamplifier with balanced XLR or RCA line inputs is required. For USB playback from a computer Luxman recommends its LUXMAN Audio Player software for Windows and macOS.
Alternatives
The D-07X is Luxman's smaller SACD/CD player with the same pair of BD34301EKV converters.