Hifiverse

CD-/SACD-Player und Transporte - Luxman D-380

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman D-380
Bildquelle - (c) Luxman

The D-380 is a CD player from the Japanese company Luxman with a choice of a vacuum tube output or a semiconductor output. It belongs to Luxman's '38' series, whose number goes back to the brand's earlier tube amplifiers, and Luxman calls it a traditional LUXMAN design. Its full-size cabinet, 440 mm wide, is housed in a wooden box with a natural veneer finish and a hairline-finished front panel, the same style as the LX-380 tube integrated amplifier.

Key specs that matter

Applicable disc is 2-channel CD. Analogue output is unbalanced x 1, and digital outputs are coaxial x 1 and optical x 1. Output voltage is 2.1 V (solid state) and 2.4 V (vacuum tube), with an output impedance of 300 ohms. Frequency response is 20 Hz - 20 kHz (+0, -0.2 dB) for the solid-state output and 20 Hz - 20 kHz (+0.1, -0.3 dB) for the tube output. Total harmonic distortion is 0.005% (solid state) and 0.8% (vacuum tube). S/N ratio (IHF-A) is 115 dB and 105 dB respectively. The tube complement is one ECC82. Power supply is 230 V (50 Hz) or 115 V (60 Hz). External dimensions are 440 x 167 x 286 mm (W x H x D), and net weight is 10.8 kg.

Engineering and use context

A lever switch on the front panel selects the output. The semiconductor output connects directly to the DAC chip, while the vacuum tube output uses a buffer circuit with the ECC82, a film capacitor and a dedicated large output transformer. Switching is possible while a CD is playing, and the ECC82 is lit when the tube output is selected. Holding the CLEAR button on the remote starts the articulator mode, which demagnetises the output transformer of the tube circuit.

Conversion is by a Texas Instruments PCM5102A DAC chip, which supports 192 kHz/32-bit processing and has an embedded digital filter with two settings selectable by remote control. Ahead of it, a dedicated jitter reduction IC suppresses distortion caused by jitter at D/A conversion. Digital output to an external recorder or D/A converter can be switched off by remote. Luxman uses a left-sided mechanism layout, as in its D series SACD players, and the drive mechanism sits on an 8 mm thick solid aluminium base inside a loopless, shielded box chassis. The orange FL display has a 4x zoom mode and a dimmer that can switch it off completely. An aluminium remote control is supplied.

Pairing

An integrated amplifier or preamplifier with an unbalanced RCA line input is required, as there is no XLR output. The coaxial and optical outputs allow connection to an external D/A converter. In the '38' series the matching amplifier is the LX-380.

Alternatives

The Luxman D-03X is another CD player from Luxman.

Spezifikationen

  • Modellbezeichnung

    D-380

  • Transport

    Ja

  • Player

    Ja

  • SACD-Unterstützung

    k. A.

  • Wandlerchip

    N/A

  • Untere Grenzfrequenz +/- 3dB (CD) (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (CD) (Hz)

    20 000

  • Untere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Dynamikumfang (CD) (dB)

    N/A

  • Dynamikumfang (SACD) (dB)

    N/A

  • Signal-Rausch-Abstand (CD) (dB)

    N/A

  • Signal-Rausch-Abstand (SACD) (dB)

    N/A

  • Klirrfaktor + Rauschen (CD) (%)

    0.8

  • Klirrfaktor + Rauschen (SACD) (%)

    N/A

  • Abmessungen (mm)

    440 x 167 x 286

  • Gewicht (kg)

    10.8

  • Offizieller Link

Weitere Komponenten