The D-100 CENTENNIAL, also written D-100c, is an SACD/CD player with a USB DAC function from Luxman of Japan. Luxman presents it as the flagship disc player and a 100th anniversary commemorative model, marked by a chrome-plated CENTENNIAL nameplate, and places it alongside the C-10X and M-10X. Deliveries were planned for March to May 2026, at USD 18,995 in the US and AUD 25,999 in Australia.
Key specs that matter
Supported discs are 2-channel SACD and CD. Two ROHM BD34302EKV DAC chips work in monaural mode. The USB input accepts PCM up to 768 kHz/32-bit and DSD up to 22.5 MHz/1-bit, and the coaxial and optical inputs take PCM up to 192 kHz/24-bit and 2.8 MHz DSD over DoP. Output is 2.4 V at 300 ohms unbalanced and 2.4 V at 600 ohms balanced, 2.3 V with SACD and DSD. Frequency response is 5 Hz - 20 kHz (+0, -0.5 dB) for CD and 5 Hz - 38 kHz (+0, -3.0 dB) for SACD. THD is 0.0016% (CD), and S/N is 125 dB (IHF-A). Dimensions are 440 x 154 x 420 mm (W x H x D), weight is 25.4 kg and consumption is 44 W.
Engineering and use context
Luxman's LxDTM-i transport sits in a box of 8 mm aluminium side frames, a 5 mm steel top plate and a new 8 mm aluminium base plate, and is integrated directly with the main chassis. As on the D-10X, the mechanism is on the left side, leaving space for the analogue output circuit and the shortest signal path. Its tray has a dust-proof shutter.
It is the first Luxman disc player with the LIFES 1.1 feedback engine in the analogue output stage. LIFES follows the ODNF principle of feeding back only the distortion components, and version 1.1 adds a parallel-connected input stage in the differential detection amplifier. Two new clock circuits combine ultra-low phase-noise oscillator ICs with large crystal oscillators. USB runs asynchronously under a dedicated DSP, with optional Bulk Pet transfer in four modes, and S/PDIF uses the DAIR system. Three digital filters are offered for PCM and two for DSD.
Power comes from a CI-core transformer with independent left and right rectification, regulators and 40,000 µF of filter capacitance. Each RCA output is a rigid Luxman terminal at 22 mm pitch, XLR sockets are by Neutrik, and cast-iron insulator legs support the chassis. The OLED display is about 70% larger than on the D-10X.
Pairing
The matching integrated amplifier is the L-100c from the same series. Its XLR outputs require an amplifier with a balanced line input. Network transports such as the Luxman NT-07 connect over USB.
Alternatives
The Luxman D-10X is the previous flagship SACD/CD player, which the D-100 CENTENNIAL succeeds.